Philips DVP3200V/37 Press VCR Plus+, Press the Number buttons to enter the PlusCode

E8A21UD_EN1 5/29/06 3:13 PM Page 33

Timer Recording with the VCR Plus+ Programming System 33

This DVD/VCR is equipped with the VCR Plus+ programming sys- tem.

Follow these steps to set a timer recording with the PlusCode programming numbers in your TV guide.

Before you begin:		1	TV/VIDEO	VCR	DVD	VCR Plus+	2-3
● Set up the channels at the VCR (page 21).			SUBTITLE	AUDIO	ANGLE	ZOOM
● Set up the VCR Plus+ and Cable/TV channel numbers
(pages 31-32).			MENU			SETUP
			DISC/VCR			DVD
● Set the clock (page 22).							4
● Put a tape in the VCR.
1 Press VCR.			BACK	OK
2	Press VCR Plus+.			PLAY		DISPLAY
			REW			FFW
			PREV	PAUSE		NEXT
	VCR Plus+ system
				REC	STOP
	PlusCode No. : – – – – – – – –		REPEAT			+
				TIMER SET
						CH
			REPEAT			-
		3	A-B
	Press the Number buttons to enter the PlusCode		CLEAR
			REC MODE	SEARCH	MODE	TITLE
3 record.programming number of the program you wish to

Then, press VCR Plus+.

VCR Plus+ system

PlusCode No. : 1 2 3 4 5 – – –

English

4	Press K or L to select a ONCE, DAILY, or WEEKLY
	recording.Then, press B.
	● ONCE: The VCR will record a TV program on any day

you choose, up to 12 months away.

● DAILY: The VCR will record a program every day from Monday to Friday – starting at the same time and record- ing for the same length of time.

● WEEKLY: The VCR will record a program on the same day, at the same time, and for the same length of time every week.

VCR Plus+ system

B ONCE

DAILY

WEEKLY

Instructions continue on the next page.

Helpful Hints

•The number you entered may flash on the screen after step 3 if you enter an incorrect PlusCode programming number (for example, one that is too short). The previous screen will appear. Enter the correct PlusCode programming number.

•If the number you entered flashes on the screen after step 3, the timer recording you just programmed and another timer recording overlap.The current timer recording will not occur.

•You may use the VCR Plus+ Programming System to record programs on Cable TV channels up to channel 125.

•If the power fails for more than 30 seconds, programmed timer recordings will be erased.