Basic Connections (continued)
Step 4: Wireless Receiver system
E n g l i s h
1
Wireless transmitter
WIRELESS REAR
SPEAKER ANTENNA
Pr Y
WIRELESS REAR
SPEAKER ANTENNA
Pb
REAR L | REAR R |
2 | 3 |
Wireless | 5 | 4 |
Receiver |
REAR L | REAR R |
REAR L | REAR R |
table stand
●Turn on the DVD system and playback a disc.
●Select the same transmission frequency channel for both the wireless transmitter and receiver.
On the wireless transmitter:
●Press and hold SOUND button on the remote until the best frequency that obtains optimal reception.
Helpful Hints:
–In case of sound distortion, select another frequency for both the wireless transmitter and receiver. The distortion could be the result of interference caused by other equipment using same frequency channel in your house or neighborhood.
–Extend the antennas vertically to improve the reception. Check the antennas are safely positioned without obstructions.
To ensure quality sound production and transmission:
●Place both the wireless transmitter and receiver at least 3 metres apart and off the ground (recommended minimum height of 30cm). Do not place them too close to TV, AC power adaptor or any radiation sources.
●Also note that audio may be interrupted due to the reflected waves when a person crosses or approaches the space between the transmitter and wireless speaker.
●Wireless transmission may be interfere by other devices, e.g. microwave, cordless telephone, etc.
●Place the wireless receiver and antenna in standing position (as shown 5).
11
11 | 17/05/05, 1:18 PM 3139 115 23842 |
