Philips HTS5000W user manual Tuner Operations, Tuning to radio stations, Presetting radio stations

Models: HTS5000W

1 51
Download 51 pages 29.11 Kb
Page 42
Image 42
Tuner Operations

Tuner Operations

E n g l i s h

IMPORTANT!

Make sure the FM and MW antennas are connected.

Tuning to radio stations

1Press TUNER on the remote (or press SOURCE control at the front panel) to select “FM” or “MW”.

2Press 3 / 4 briefly on the remote.

The display panel will show "SEARCH" until a radio station with sufficient signal strength is found.

3Repeat step 2 if necessary until you find the desired radio station.

4To tune to a weak station, press 1 / 2 briefly and repeatedly until an optimal reception is found.

Helpful Hint:

– If the FM radio station is transmitting RDS (Radio Data System) data, the RDS name will be displayed and stored.

Presetting radio stations

You can store up to 40 FM and 20 MW preset radio stations in the memory.

Helpful Hints:

The system will exit presetting mode if no button is pressed within 20 seconds.

If no valid frequency is detected during Plug and Play," PLEASE CHECK FM/MW ANTENNA" appears.

Automatic tuning

Automatic tuning allows you to store all available radio stations automatically.

1 Make sure the FM and MW antennas are connected.Tuning to radio stations AUTO INSTALL.. Presetting radio stationsAutomatic tuning

DVD system’s

display panel

1For first time setup, press TUNER.Manual background 2

1For first time setup, press TUNER.

"AUTO INSTALL PRESS PLAY" appears.

2 Press PLAY B until "INSTALL TUNER" appears on the display panel.

The system will start searching from FM band and followed by MW band.

All the available radio stations with strong signal strength will be stored automatically.

Once complete, the last tuned radio station will play.

42

001-051-hts5x-01-Eng50

42

17/05/05, 1:19 PM 3139 115 23842

Page 42
Image 42
Philips HTS5000W user manual Tuner Operations, Tuning to radio stations, Presetting radio stations, Helpful Hints

FAQ

How do I tune to radio stations?

You can tune to radio stations by pressing the TUNER button on the remote or the SOURCE control at the front panel to select FM or MW, and then pressing 3/4 briefly until the desired station is found.

How many preset radio stations can I store?

You can store up to 40 FM and 20 MW preset radio stations in the memory.

What does 'Automatic tuning' do?

Automatic tuning allows you to store all available radio stations automatically by pressing TUNER and following the on-screen instructions.

How to tune to weak station?

To tune to a weak station, press 1 / 2 briefly and repeatedly until an optimal reception is found.

How to preset radio stations?

You can preset radio stations by following the instructions provided in the manual.

What happens if no valid frequency is detected during Plug and Play?

If no valid frequency is detected during Plug and Play, 'PLEASE CHECK FM/MW ANTENNA' will appear on the display panel.

What is the significance of RDS name on FM radio?

If the FM radio station is transmitting RDS Radio Data System data, the RDS name will be displayed and stored.

What to do if the system exits presetting mode?

The system will exit presetting mode if no button is pressed within 20 seconds. Simply repeat the presetting process.

What is the procedure for automatic installation?

For first time setup, press TUNER and follow the on-screen instructions.

How to connect FM and MW antennas?

Make sure the FM and MW antennas are connected to ensure proper operation of the tuner.