Philips KX-HCM8 operating instructions For Indicator Control window

Operating Instructions

		About Network Camera Setup
Problem		Cause and Remedy
When Top Page	•	Enter the correct IP address in the web browser.
does not	•	IP address and Subnet Mask of the PC and the Network
appear.
		Camera must be in the same class of the private IP address on
		the LAN. Refer to page 25.
	•	The network congestion prevents Top Page from appearing
		quickly. Wait for a while.
	•	A proxy server may prevent you from connecting directly to
		Network Camera, set up not to use the proxy server. Refer to
		page 26 for details.
	•	When Top Page does not appear, port number 80 might not be
		available. Ask your ISP for the available port number.
	•	When you use DDNS, you need to set Default Gateway and
		DNS server address. Refer to page 50 for Network window.
	•	If Top Page does not appear in the above procedure, press the
		CLEAR SETTING button and set up with the Setup CD-ROM
		again.
	•	The procedure on page 111 can be established if Network
		Camera has a defect.
When forgetting	Check an IP address by using the Setup CD-ROM. Network
the IP address	Camera List window on page 29 can tell you the IP address of
of the Network	Network Camera.
Camera.
When forgetting	Follow the steps below.
the password to	1.	Initialize Network Camera by pressing the CLEAR SETTING
access Setup		button.
Page.
	2.
		Reconfigure Network Camera.
Power Indicator	•	Confirm that the standard AC adaptor PQLV10 (Order No.
does not light		PQLV10Y) is used.
up.	•	Confirm that the Indicator Control is disabled. Refer to page 79
		for Indicator Control window.
Ethernet	•	Ethernet cable is not connected properly.
Indicator does	•	PC, Ethernet hub or broadband router is not working.
not light up.

106