Philips KX-HCM8 operating instructions Over write setting, Data transfer method

Operating Instructions

Over write setting:

Selects [Over Write...] to overwrite the transferred image or [Add time...] to save each transferred image.

Data transfer method:

Use [Passive Mode] normally. If FTP does not work properly, ask your ISP or network administrator about the transferring mode of FTP server. [Passive Mode] or [Active Mode] is available.

b.Mail: Sets the SMTP and POP3 server address*1 or Host Name*2, Login ID*2 and Password*2.

From (Reply)*3: Enter the e-mail address of [Reply-to]. [To] can be the same address as From (Reply).

To *3: Enter the e-mail address of receiver.

Subject & Text *4: Sets the subject and text of the e-mail. Time in 24 h mode is attached on the subject.

Notes

•Set POP3 server address or Host Name, Login ID and Password if you need POP authentication to send the e-mail. Ask your ISP or administrator.

•Network Camera will only operate correctly with SMTP (Simple Mail Transfer Protocol) server. It is not available with Internet- accessed mail servers like "Hotmail®" or other mail accounts accessed via web browser.

c.Selects [No Message] or [Mail]

Mail: Only the notification e-mail is sent when the alarm trigger is active. Refer to b. Mail for each parameter.

*1 Refer to IP addressing on page 93.

*2 Refer to unavailable character set 1 on page 93. *3 Refer to unavailable character set 2 on page 93.

*4 Only ["] is unavailable in the ASCII character table on page 93 and refer to displayable character set on page 94.

2.Select/Enter the each parameter. Click [Save] when finished.

•Click [Cancel] to quit the current settings. The window returns to Setup Page without saving the parameters.

•Click [Clear Buffered images] to clear the buffered image. [Clear Buffered images] does not save the parameters.

[For assistance, please call: 1-800-272-7033] 67