Philips KX-HCM8 Go to Top, Name/Time, Security, Administrator, General User, Top View Image

	Operating Instructions
Item	Description
(1) Go to Top Page	Links to Top Page. You can access Single/Multi-
	Camera screen in Motion JPEG/JPEG - Regularly
	Refresh. Refer to page 49.
(2) Network	Configures the network setting (Static/DHCP,
	Default Gateway, Port Number, DNS, DDNS and
	Bandwidth). Refer to page 50.
(3) Name/Time	Sets the Camera Name on the Single Camera
	screen. Date and Time is used in the Alarm/Timer
	mode in the Image Transfer feature and On the Air
	time setting on Top View Image Setting window.
	NTP automatically adjusts the internal clock of
	Network Camera. Refer to page 54.
(4) Security:	Sets administrator ID and password. Authentication
Administrator	window can be enabled. Administrator should
	control Network Camera. Refer to page 56.
(5) Security:	Sets general user ID and password. General user is
General User	the registered user. Refer to page 58.
(6) Top View Image	Sets the initial language, Title, Image URL, Link
	URL, the image resolution, image quality, refresh
	interval and the Limit time of Continuous Motion and
	On the Air time. Top View Image screen consists of
	Single Camera and Multi-Camera screen. Refer to
	page 60.
(7) Image Transfer	Enables the Alarm/Timer mode in the Image
	Transfer feature. Network Camera can transfer the
	image via e-mail or FTP. The alarm/timer trigger can
	be set on Image Transfer window. Refer to page 62.
(8) Camera Setup	Sets White Balance and Power Line Frequency. You
	can lock the Brightness. Refer to page 74.

(9)Multi-CameraThe Multi-Camera screen needs to set up these parameters. Enter the Camera Names and IP addresses of each Network Camera. The Multi- Camera can display up to four images in a window. Refer to page 76.

[For assistance, please call: 1-800-272-7033] 47