Operating Instructions
Non Transfer mode
Non Transfer mode enables [Start Capture] on the operation bar to buffer the image on the Single Camera screen. Refer to page 42. Capture Control can lock [Start Capture] on the operation bar to prevent the user from capturing the Buffered Image. Click [Clear Buffered images] to clear the buffered image. [Clear Buffered images] does not save the parameters.
1.Click [Image Transfer] on Setup Page.
2.Select the each parameter. Click [Save] when finished.
•Click [Cancel] to quit the current settings. The window returns to Setup Page without saving the parameters.
[For assistance, please call: | 63 |
