Network Video Server User’s Guide
J. Reinstating the Factory Default Settings
This information explains instructions in detail on how to set the default settings in the NETWORK VIDEO SERVER. In certain circumstances it may become necessary to restart or reinstate the Factory Default settings for your NETWORK VIDEO SERVER: This is performed by pressing the Reset Button, or using Hyper Terminal Setting. Follow these instructions to reinstate the product factory default settings
Using the Administrator Menu
①Login to NETWORK VIDEO SERVER.
② Open the Administrator Menu.
③ Open the System Configuration Page.
④ Press the “RESTORE DEFAULTS” button.
Using Hyper Terminal
①Execute “Hyper Terminal” as referred to Chapter “4.3.1 Configuring Hyper Terminal”
②Supply the power to the
NETWORK VIDEO SERVER.
③After a while, the count down starts with the message
“Press 'p' key to stop
.At this time, press ‘p’ key. Then,
[NETWORK VIDEO SERVER Boot] prompt shows like the right side image.
④ When you enter ‘w’, Administrator ID & Password reinstate as factory default ‘admin’
73
