Network Video Server User’s Guide
Assigning IP Address by using Hyper Terminal (Advanced Users only)
This chapter is for advanced users only. Normally it is not required to access the camera via Hyper Terminal. The installation via IP INSTALLER is the preferred method. You may skip this chapter and continue with “Accessing NETWORK VIDEO SERVER Homepage”.
Configuring Hyper Terminal
Hyper Terminal is a basic program for Windows 9x/NT/2000/XP. A PC can communicate with external devices through the serial port by using this program. The steps you should take to set the Hyper Terminal are as follows in the case of Windows 2000 OS:
① Start Æ Programs Æ Accessories Æ
Communications Æ Hyper Terminal.
Select one of the icons and then enter an
② Select a serial port of PC, then click “OK” button. (Usually COM1 or COM2 is recommended)
18
