Network Video Server User’s Guide
D. In case that you use default account, the administrator may protect the video from the public.
6.How can I use a name instead of the IP address to connect Video Server?
To allow users to connect to Video Server through an easily memorized name, the administrator must installs the Video Server with a reserved IP address and assigns it with a name in the domain name service, then users can connect to Video Server by typing a name instead of IP address. If there is DHCP service in the network, the IP address must be excluded in the DHCP service to prevent from IP conflict.
7.What additional software is required?
Networking IP Cameras with an embedded Operating System (OS) should not need any additional software. An exception represents Video Surveillance of multiple Network IP Cameras with the capability of simultaneous recordings. In this case the use of a 3rd Part Video Surveillance Software is mandatory. A list of tested applications can be found at the INTELLINET NETWORK SOLUTIONS Web Site.
8.How does the built-in motion detection work?
It very simply compares what it sees now to what it saw in the last frame and based on a sensitivity you select will trigger an event. The event can be to send an email, to send an Image to a FTP server, or to send a series of images (before and after the motion is detected) to an email address or a FTP
9.What is the maximum length Ethernet cable I can use?
The same topology limitations that apply to any 10/100 Ethernet card apply, meaning the maximum segment length is 100 meters from switch/hub to the camera
10.How much digital video can be stored on a normal
Network IP Cameras equipped with a compression technology that can store almost a month of continuous video on a
11.What is Power-over-Ethernet (PoE)?
51
