Network Video Server User’s Guide
System Configuration
This screen is used to configure camera name, location, and image sensor oscillator for frequency, PTZ control and System information for NETWORK VIDEO SERVER.
1.Server name
You can enter the Name of your camera here. The name must not be longer than 15 characters.
2.Server location
You may enter the location of your camera here. The location must not be longer than 30 characters.
3.Supply voltage to output port option
This option is to supply voltage to the NETWORK VIDEO SERVER output port. The device can provide 12V, 150 mA for an external device. With this option turned on, the camera will always send out 12V to the output port. This setting overwrites any programming you may have made in the Event Trigger Configuration regarding the Output port.
44
