SAFETY PRECAUTIONS

CAUTION

RISK OF ELECTRIC

SHOCK. DO NOT OPEN!

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT OPEN COVERS. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This label may appear on the bottom of the unit due to space limitations.

The lightning flash with an arrowhead sym- bol, within an equilateral triangle, is intended to alert the user to the presence of uninsu- lated “dangerous voltage” within the prod- uct’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to pres- ence of important operating and mainten- ance (servicing) instructions in the literature accompanying the appliance.

WARNING

To prevent fire or shock hazard, do not expose units not specifically designed for outdoor use to rain or moisture.

Attention: Installation should be performed by qualified service personnel only in ac- cordance with the National Electrical Code or applicable local codes.

Power Disconnect: Units with or without ON-OFF switches have power supplied to the unit whenever the power cord is inserted into the power source; however, the unit is operational only when the ON-OFF switch is in the ON position. The power cord is the main power disconnect for all units.

External Power Supplies

Use Only the Recommended Power Supplies. Power supplies must comply with the requirements of the latest version of IEC 65/VDE 0860. Substitutions may damage the unit or cause a fire or shock hazard.

220-240 V, 50 Hz Power Cords

220-240 V, 50 Hz power cords, input and out- put, must comply with the latest versions of IEC Publication 227 or IEC Publication 245.

ATTENTION

OBSERVE PRECAUTIONS

FOR HANDLING

ELECTROSTATIC

SENSITIVE

DEVICES

WARNING: Electrostatic-sensitive device. Use proper CMOS/MOSFET handling precautions to avoid electrostatic discharge.

NOTE: Grounded wrist straps must be worn and proper ESD safety precautions observed when handling the electrostatic-sensitive printed circuit boards.

1 UNPACKING

Unpack carefully. This is electronic equipment and should be handled carefully.

Check to ensure that the following items are in- cluded:

• Model number of unit.

If an item appears to have been damaged in ship- ment, replace it properly in its carton and notify the shipper. If any items are missing, notify your Philips Communication & Security Systems Inc. Sales Representative or Customer Service.

The shipping carton is the safest container in which the unit may be transported. Save it for possible future use.

2 SERVICE

If the unit ever needs repair service, the customer should contact the nearest Philips Communication

&Security Systems Inc. Service Center for return authorization and shipping instructions.

Service Centers

U.S.A. & Canada: 800-366-2283

Mexico & Central America: 52-5-564-2726

Europe & Middle East: 44-1932-765666

South America: 54-1-956-0837

Australia: 61-2-888-9000

New Zealand: 64-4-237-7297

3DESCRIPTION

4INSTALLATION

2

Page 35
Image 35
Philips LTC 3963/51 manual Safety Precautions