SETTING THE TIME AND DATE
Use the CLOCK SET display to set the date and time.
TIME (HOUR, MINUTE, SECOND) |
| ||||||||||||||
|
|
|
|
| DATE (MONTH, DAY, YEAR) |
| |||||||||
|
|
|
|
|
|
|
|
|
|
|
| DAY OF WEEK: Corrected | |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| automatically to |
|
|
|
|
|
|
| CLOCK SET |
|
| ||||||
|
|
|
|
|
|
|
| match the input | |||||||
|
|
|
|
| 1 |
| FR I |
|
|
| |||||
|
|
|
|
|
|
| date. | ||||||||
|
|
|
|
|
|
| |||||||||
|
|
|
| 12 | : 00 : A |
|
|
|
|
|
|
| |||
OPT I ONS
OSD | TYPE : | OFF |
T IME | ADJUST : | SLAVE |
TIME ADJUST (MASTER or SLAVE)
OSD TYPE (OFF, FULL or HALF)
CLOCK SET Display Format Description
1.Press the START/STOP button so that [CLOCK SET] flashes on/off.
2.Press the SET button. The day flashes on/off.
3.Press the UP or DOWN button until the desired number appears on the monitor.
4.Press the SET button. The month flashes on/off.
5.Press the UP or DOWN button until the desired number appears on the monitor.
6.Press the SET button. The year flashes on/off.
7.Press the UP or DOWN button until the desired number appears on the monitor.
8.Press the SET button. The hour flashes on/off.
9.Press the UP or DOWN button until the desired number appears on the monitor.
Remember to watch the AM/PM indicator when setting the hours.
10.Press the SET button. The minutes flash on/off.
11.Press the UP or DOWN button until the desired number appears on the monitor.
12.Press the START/STOP button: the seconds will start counting and the clock will start. [CLOCK SET] will flash on/off again at this time.
13.To display the time/date you have set here on the monitor screen, press the START/STOP but- ton again to cause [OPTIONS] to flash, and then proceed with step 2 in item on OSD TYPE on page 15.
14.Press the START/STOP button three times.
•Make sure that letters [CLOCK SET] or [OPTIONS] are not flashing.
Notes:
•Perform the same procedure as when setting the time and date to make corrections after having set them. The minutes flash on/off when the SET button is pressed (in step 2 above).
•To record time and date on the tape, display them on the monitor screen. If they are not displayed on the monitor, they cannot be recorded on the tape.
14
