CONTROLS AND FUNCTIONS
[FRONT]
1 | 2 | DISPLAY (See page 7) | |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
S |
3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
1.RESET BUTTONS
Press these buttons at the same time to clear all (microprocessor) functions.
Press the “S” button to reset the system. (This does not erase the stored information.)
2.CASSETTE COMPARTMENT
3.SHARPNESS CONTROL
Adjust the picture quality to hard or soft during play- back.
11.UP BUTTON
Press to increase, change or advance to the next higher value.
12.V-POS (VERTICAL POSITION) BUTTON
Press repeatedly to control the vertical position of the programmable display on the monitor.
13.H-POS (HORIZONTAL POSITION) BUTTON
Press repeatedly to control the horizontal position of the programmable display on the monitor.
4.TRACKING CONTROL
Adjust to optimize the picture quality during playback at the 06, A18 and A30 hour speeds.
5.SLOW TRACKING CONTROL
Adjust to optimize the picture quality in the SLOW PLAY mode, e.g. speeds over 30 hours.
6.V. LOCK CONTROL
Reduces vertical jitter in the still play mode.
7.PROGRAM BUTTON
Press to select one of the six programmable func- tions.
8.START/STOP BUTTON
Press to start or stop the programming of a program- mable function. (Press once to start the programming sequence and a second time to stop (end) it.)
9.SET BUTTON
Press to select the specific value which is to be changed with the UP/DOWN buttons.
10.DOWN BUTTON
Press to decrement, change or reverse to the previous/lower value.
14.ALARM INDEX BUTTON
Press this button to cause the INDEX indicator to light, and set the VCR to the visual search mode (press F.FWD or REWIND during playback mode) in this state; the start of the alarm recorded can be located.
15.ALARM RESET BUTTON
Press to clear POWER LOSS information. When this button is pressed, the alarm memory is cleared.
16.COUNTER RESET BUTTON
Press to clear the digital counter to “00000”.
17.REC/PLAY HOURS BUTTONS
▲ (UP): | Press to increase hours to the next |
| higher value. |
▼(DOWN): Press to decrease hours to the next lower value. The tape speed will be indicated as part of the monitor display.
18.TIMER BUTTON
Press after programming the TIMER for automatic TIMER recording. See page 15 for TIMER program- ming.
19.SUMMER TIME BUTTON
Press to set the summer time. See “SUMMER TIME FUNCTION” on page 15 for details.
5
