SETUP (Continued)
SETTING [OPTIONS] ITEMS
OSD TYPE: The TIME/DATE display was not designed to appear at the factory. If you wish to record the time/date together with image, perform the following procedure:
There are two types of TIME/DATE display: FULL and HALF.
FULL
DATE
POWER LOSS (IF SENSED)
DAY OF WEEK
ALARM COUNT*
6 : 12 : 00 09 T L
SECURITY LOCK (IF ACTIVATED)
TIMER (IF ON)
RECORDING SPEED (IN TOTAL HOURS)
TIME
*The ALARM Count Number records alarms from 0 to 99 and then resets to 0 and continues counting.
HALF
DATE
No display
20 | ||
6 | : 12 | : 00 |
TIME
OFF
No display
1.Press the START/STOP button twice so that [OPTIONS] flashes on/off.
2.Press the SET button so that the OSD TYPE: set- ting flashes on/off.
3.Press the UP or DOWN button to select the setting (OFF, FULL or HALF).
4.Press the START/STOP button again. The selected setting will light.
Note: The position of the TIME/DATE display on the monitor can be adjusted by using the
TIME ADJUST: When two or more of this VCR model are connected to pins i TIME ADJUST of each EXTERNAL INTERFACE jack, the clocks in both VCRs can automatically be set to the same time (TIME ADJUST function).
To use the TIME ADJUST function, set one VCR to MASTER and any others to SLAVE.
1.Press the START/STOP button twice so that [OPTIONS] flashes on/off.
2.Press the SET button twice so that the TIME ADJUST: setting flashes on/off.
3.Press the UP or DOWN button to select the setting (SLAVE or MASTER).
4.Press the START/STOP button again. The selec- ted setting will light.
Notes:
•You can set OSD TYPE and TIME ADJUST after you have set the date and time.
•The TIME ADJUST function operates only when the VCRs are turned on. Therefore, turn the VCRs on around 2:00:05. This function will not operate if the times on the MASTER and SLAVE VCRs drift by more than one hour and 30 minutes.
SUMMER TIME FUNCTION
Set the summer time function when a cassette is not loaded in this VCR.
Press the SUMMER TIME and UP buttons simul- taneously in modes other than the timer recording standby mode; the hour display will be counted up by one.
Press the SUMMER TIME and DOWN buttons simul- taneously to count the hour display down by one. You can change the hour display in
SETTING THE TIMER
To set the 24 Hour On/Off Timer function
PROGRAM NUMBER
TIMER RECORDING TIME START/STOP
TIMER RECORDING TAPE SPEED
1 | 0 : 00 a 0 : 00 | 09 | |
2 | 0 : 00 a 0 : 00 | 09 | |
3 | 0 : 00 a 0 : 00 | 09 | |
4 | 0 : 00 | a 0 : 00 | 09 |
5 | 0 : 00 | a 0 : 00 | 09 |
6 | 0 : 00 | a 0 : 00 | 09 |
7 | 0 : 00 | a 0 : 00 | 09 |
MON:✽,✽ TUE :✽,✽ WED :✽,✽
THU :✽,✽ FR I :✽,✽ SAT :✽,✽
SUN:✽,✽
DAY OF WEEK AND PROGRAM NUMBER
1:TIMER will record for the time set for PROGRAM NUMBER 1
2:TIMER will record for the time set for PROGRAM NUMBER 2
3:TIMER will record for the time set for PROGRAM NUMBER 3
4:TIMER will record for the time set for PROGRAM NUMBER 4
5:TIMER will record for the time set for PROGRAM NUMBER 5
6:TIMER will record for the time set for PROGRAM NUMBER 6
7:TIMER will record for the time set for PROGRAM NUMBER 7
✽:No recording
TIMER Display Format Description
15
