SETTING THE BUZZER
This VCR has a buzzer function.
Use SELECTION MENU 2 to select the times when you wish buzzer to sound.
Note: “OFF” is specified for all buzzer options at the factory.
SELECT I ON MENU BUZZER SELECT I ON
TAPE END : | OFF |
TROUBLE : | OFF |
NO V I DEO : | OFF |
AUTO REC CHECK : OFF | |
ALARM OUT : | OFF |
TAPE END (ON or OFF)
•To specify whether buzzer turns on or off, synchronized with pin r TAPE END OUT of the EXTERNAL INTERFACE jack.
ON: Buzzer will keep sounding when tape reaches the end during recording.
OFF: Buzzer will not sound even when tape reaches the end.
TROUBLE (ON or OFF)
•To specify whether buzzer turns on or off when abnormality occurs in this VCR.
ON: Buzzer will keep sounding if abnormality occurs.
OFF: Buzzer will not sound even if abnormality occurs.
NO VIDEO (ON or OFF)
•To specify whether buzzer turns on or off when no video signal is input during recording.
ON: Buzzer will keep sounding when video signal input stops.
OFF: Buzzer will not sound even when input stops.
AUTO REC CHECK (ON or OFF)
•To specify whether buzzer turns on or off if recording is abnormal after the AUTO REC CHECK function.
ON: Buzzer will keep sounding if recording is abnormal.
OFF: Buzzer will not sound even if recording is abnormal.
ALARM OUT (ON or OFF)
•To specify whether buzzer turns on or off when alarm is output. ON: Buzzer will keep sounding if alarm is output.
OFF: Buzzer will not sound even if alarm is output.
SELECTION MENU 2 Format Description
1.Press the START/STOP button.
The TAPE END option “OFF” flashes on/off.
2.Press the SET button repeatedly until the item the setting of which you want to change flashes.
3.Press the UP or DOWN button to select the value or setting you want.
4.After selecting, press the START/STOP button.
To stop buzzer:
1.When TAPE END lights in the VCR display, press the EJECT button: The tape will come out and the buzzer will stop.
2.When “A” lights in the VCR display and also “NO VIDEO” appears on the monitor screen, the buzzer will stop when video signal is input.
3.When “REC CHECK” appears on the monitor screen, press the STOP button: The buzzer will stop.
4.When alarm indicator ALARM flashes in the VCR display, press the ALARM RESET button: The buzzer will stop.
5.If buzzer function varies in any of the above cases, the VCR may be abnormal. Press the RESET but- tons simultaneously: The buzzer will stop. However, note carefully that all settings will return to initial values set at the factory.
Note: You can also stop buzzer by switching ON to OFF in SELECTION MENU 2.
18
