Playback Mode
-36-
Playback Mode

Playing Back a Tape

The recorded scene can be played back
immediately after the recording.
1Set the [OFF/ON] Switch (43) to [ON].
The Power Lamp (41) lights up.
2Set the Mode Dial (39) to Tape Playback
Mode.
3Press the [6] Button (19) to rewind the
tape.
Rewind the tape to the point where you want
to start playback.
When the tape reaches the beginning,
rewinding stops automatically.
4Press the [1] Button (17) to start playback.
The [!] Indication appears.
If a cassette recorded with a copyright
protection signal is played back, the picture is
distorted by mosaic-like patterns.
To Stop Playback
Press the [] Button (18).
ON
OFF
(43)
(41)
PC
S
D
(39)
ENTER
FADE
STILL
is
(19)
FADE
STILL
ENTER
is
(17)
(18)
ENTER
FADE
STILL
is

ªAdjusting the Sound Volume

To adjust the volume, push the [`VOL/JOG_]
Lever (46) to display the [VOLUME] Indication.
Push the [`VOL/JOG_] Lever towards [T] to
increase the volume or push the [`VOL/JOG_]
Lever towards [W] to decrease the volume. The
[VOLUME] Indication goes off after the
adjustment is finished.
To adjust the volume with the Remote Controller,
press the [T] or [W] Button to display the
[VOLUME] Indication. Press the [T] B utton to
increase the volume or press the [W] Button to
decrease the volume. The [VOLUME] Indication
goes off after the adjustment is finished.
The sound volume cannot be adjusted using the
Remote Controller in Playback Zoom Mode.
(-38-)
For other notes concerning this item, see -60-.

Finding a Scene You Want to Play

Back

ªCue/Review Playback

If the [5] Button (16) or [6] Button (19) is
pressed during Playback, it turns to Cue Playback
A or Review Playback B.
If the Button is held continuously, it turns to Cue
Playback or Review Playback until you release
it.

ªVariable Speed Search Function

The speed of Cue Playback or Review Playback
can be varied.
1During playback, press the [1] Button (17).
VOL/JOG
WT
(46)
ENTER
FADE
STILL
is
(19) (16)
AB
120.200B.book 36 ページ 2004年2月25日 水曜日 午後4時0分