VOICE COMMAND

VOICE COMMAND

Follow these three easy steps:

1 - Adjust the Microphone

2 - Set the Voice Command Button

3 - Try out Voice Command

 1 - ADJUST THE MICROPHONE 1 - ADJUST THE MICROPHONE

To get better speech recognition:

1If there is a microphone setting available, turn off Automatic Gain Control and set the microphone gain level to a medium level.

After completing this task, press Done and Back as needed to return to help.

 2 - SET THE VOICE COMMAND BUTTON 2 - SET THE VOICE COMMAND BUTTON

The Voice Command Button is used to activate voice recognition. To set the Voice Command Button:

1Press Start (More ...) Voice Command Setup.

2In Voice Button, select the button you want to assign and press Done to accept.

 3 - TRY OUT VOICE COMMAND 3 - TRY OUT VOICE COMMAND

Let’s try the “Help” command to learn how to answer a question. If you have any problems read Troubleshooting:

C

H1 Hold your device about 2" away.

9

2Press and release the Voice Command Button.

238

Page 240
Image 240
UTStarcom PN-820 user manual Adjust The Microphone, Set The Voice Command Button, Try Out Voice Command