EN
Checking the Firmware Ver- sion
1Press OK, 47 and OK.
2The model designation and the configured country appear on the display.
3Confirm with OK.
4The information on the firmware version of the device is displayed.
5Confirm with OK.
Using Service Codes
The service codes delete all the changed settings and your device is reset to factory settings. It may be possible that the device with the changed settings reacts differently than expected.
CAUTION!
Settings will be Deleted!
Only use the service codes if this is absolutely necessary. Some service codes also delete saved messages and telephone book entries.
1Press OK, 45 and OK.
2Enter a service code:
3Confirm with OK.
4Using [ select SURE: YES.
5Confirm with OK.
Notice
Cancelling Entry
If you have entered the incorrect code, you can cancel the entry with SURE: NO.
Power Cycling
If a problem occurs that cannot be corrected with the instructions in this user manual (see also the help below), follow the steps given here.
1Pull out the power plug.
2Wait at least ten seconds, then plug the power plug back into the socket.
3Follow the instructions on the display and in the error report. If the problems repeats, please contact our tech- nical customer service or your retailer.
28 | Philips · PPF 631 · 632 |
