Philips PPF 725 Getting Outside Line, Chain Dialling, Insert Dialling Pause, Hands-Free, PPF755

Switching Notification Tone for Call Waiting On/Off

1.Press OK, 42 and OK.

2.Use [, to select whether you would like to turn the call waiting on or off.

3.Confirm with OK.

Getting Outside Line

Private branch exchanges (PABX) are typical in many of- fices and some households. You must dial an outside line access code in order to get a connection to the public telephone network (PSTN) from a PABX.

Enter the outside line access code with which you reach the public telephone network before you enter the de- sired number or select a stored entry. The outside line access code is usually 0.

Incorrect Outside Line Access Code

In rare cases, the outside line access code may be a different number or a two-digit number. For older telephone systems, the outside line access code can be R (= Flash). Press R to enter this outside line access code. If the connection to the public telephone network is not possible, contact your telephone system supplier.

Connection to Private Automatic

Branch Exchange

If you operate your device permanently on an extension, save the outside line access code 96 (see also chapter Configuring Telephone Lines and Services, page 31).

Chain Dialling

You can combine and edit manually entered digits and saved entries, before the dialling process starts. If you have saved, for example, the telephone number prefix of an inexpensive telephone service provider (call-by-call) as a telephone book entry, select this entry and manually enter the subsequent telephone number or select an- other saved entry.

Insert Dialling Pause

It may be necessary to insert a dial pause in telephone number, for example, for a direct-inward dialling number, a sub-address or in a long distance number. Hold Rpressed (for at least two seconds). – appears on the display. The second part of the number is dialled only after a short pause.

Hands-Free

(PPF¦755)

1.Press l to dial without lifting up the handset. You will hear a dial tone from the loudspeaker.

2.Enter the desired number using the numeric keypad or select a saved entry. The dialling process begins immediately. At this stage, any numbers that have been incorrectly entered can no longer be changed.

Hands-Free

Put the handset near the device with the micro- phone facing up in order to achieve an optimum communication.

Recording a Telephone Conversation

(PPF¦755)

You can record a telephone conversation. After record- ing, the ä key flashes, and you can hear the re- cording like a message on the answering machine.

CAUTION!

Recording a Telephone Conversation!

You must inform your caller when recording a telephone conversation.

1.During a call, press b. The recording begins.

2.Press b again to end the recording.

Telephone Book of the Device

In the telephone book of your device, you can save en- tries with multiple numbers and collect multiple entries into groups. You can assign various ring tones to the en- tries. Follow the specifications in the technical data.

Navigating in the Editor

You can move the cursor using [. Use C to delete individual characters. Press j to close the menu and return to the starting mode.

Saving Entry

1.Hold m pressed (for at least two seconds).

Access Function

You can also call the function by pressing OK, 12 and OK.

2. Enter the name using the letter keypad. Enter capital letters by pressing and holding +key. You can delete individual characters using \. You can enter space using ½. Press CTRL and the respective letter key to enter the special character printed above it.

Navigating in the Editor

You can move the cursor using [. Use C to delete individual characters.

3. Confirm with OK.

EN

Telephone Functions · Getting Outside Line 13