Philips PPF 755, PPF 725 General Safety Information, Setting Up the Device, Power Supply, Repairs

Models: PPF 725 PPF 755

1 44
Download 44 pages 8.07 Kb
Page 4
Image 4
1 General Safety Information

EN

1 General Safety Information

Your device has been tested in conformity with stand- ards EN 60950-1 and IEC 60950-1 and should only be operated with telephone systems and power equipment that meet these standards. The device was built exclu- sively for use in the indicated sales region.

Do not make any changes or settings that are not de- scribed in this user manual. Physical injury or damage to the device or loss of data can result from improper han- dling. Take note of all warning and safety notes indicat- ed.

Setting Up the Device

The device should be placed securely on a stable, flat surface. If the device should fall, it can be damaged or can cause injury to people, especially small children. Po- sition all cables in such a way that no one will stumble on them, thus avoiding possible injuries to persons or damage to the device itself. If the device is dropped it should be inspected by a technical service center.

The distance between the device and other devices or objects must be at least 15 centimetres; this also applies to the use of additional cordless telephones. Do not place the device in the vicinity of radios or televisions.

Lock the cover of the device completely into place when opening the device. You could be injured if the cover falls while you are working on the device.

Protect the device against direct sunlight, heat, large temperature fluctuations and moisture. Do not place the device in the vicinity of heaters or air conditioners. Observe the information on temperature and humidity in the technical data.

The device must have sufficient ventilation and may not be covered. Do not put your device in closed cabinets or boxes. Do not place the machine on soft surfaces such as tablecloths or carpets and do not cover the ven- tilation slits. Otherwise the device could overheat or catch fire.

In the event that the device becomes too hot, or if you see smoke coming from the device, you must immedi- ately pull the power cable out of the power socket. Have your device examined by trained professionals at a technical service location. To prevent the spread of fire, open flames should be kept away from the device.

Do not plug in the device in moist rooms. Never touch the mains cable, the mains connection or the telephone socket with wet hands.

Do not allow liquids to enter into the device. Discon- nect the device from the power socket if liquids or for- eign objects have entered the device and have your device examined by trained professionals at a technical service location.

Do not allow children to handle the device without su- pervision. The packing materials should be kept out of the hands of children.

The telephone handset of the device is magnetic. Cau- tion, small metallic objects (paper clips) may be retained if placed near or on the telephone handset.

Power Supply

Check whether the mains voltage of your device (indi- cated on the type label) matches the mains voltage avail- able at the setup location.

Use only the power and telephones cables supplied.

Set up your device so that the power socket is easily ac- cessible. The device does not have an on/off key. In an emergency, disconnect your device from the power supply by pulling the power plug.

Never touch the power or telephone cable if the insu- lation is damaged. Replace damaged wires immediately. Use suitable cables only; if necessary please contact our technical customer service or your retailer.

Disconnect your device from the mains and telephone network during an electrical storm in order to avoid electrical surge damage. If this is not possible, do not use the device during an electrical storm.

Before cleaning the surface of your device, disconnect it from the power and telephone networks. Use a soft, lint-free cloth. Never use liquid, gaseous or easily flam- mable cleansers (sprays, abrasives, polishes, alcohol). Do not allow any moisture to reach the interior of the device.

Only clean the display with a dry, soft cloth. If the display breaks, a mildly corrosive liquid may escape. Avoid all contact with your skin and eyes.

In the event of a power failure, your device will not func- tion; saved data is retained.

Repairs

Should disruptions occur, follow the instructions on the display and on the error report.

Do not make any repairs to the device yourself. Improp- er maintenance can result in injuries or damage to the device. Only have your device repaired by an authorised service centre.

Do not remove the type label from your device; this would void the warranty.

Consumable Materials

Use only original consumable materials. These are avail- able from a specialised retailer or through our order service (see back side of this user manual). Other con- sumable materials could damage the device or shorten its service life.

Dispose of old consumable materials according to the waste regulations of your country.

4

Philips · PPF 725 · PPF 755

Page 4
Image 4
Philips PPF 755, PPF 725 General Safety Information, Setting Up the Device, Power Supply, Repairs, Consumable Materials