Recording One Channel/Watching Another | Philips SVA102 guide

Hookups With a Cable Box/Direct Broadcast System (cont’d) 9

With this connection:

●You may watch one channel while recording another.

●You may not record scrambled channels.

1 VCR

		ANT
		IN
OUT	IN	OUT
		OUT

2	75V
2	ANT	/
	CABLE
	IN
	OUT

Cable Box/DBS

VIDEO

Cable

Signal

CH3 CH4

		RF coaxial
		cable
	RF coaxial	3	TV’s ANTENNA
	RF coaxial		IN Jack
	cable		IN Jack

Connections

1

Connect a Cable signal to the VCR’s ANT(enna) IN Jack.

2

Use an RF coaxial cable (supplied) to connect the OUT Jack on the VCR to the IN Jack on the Cable Box/DBS.

3

Use a second RF coaxial cable to connect the OUT Jack on the Cable Box/DBS to the ANTENNA IN Jack on the TV.

Recording One Channel/Watching Another

1

Put the Cable Box/DBS on the same channel as the VCR’s CH3/CH4 switch. (Make sure the TV is on the Cable Box/DBS output channel, 03 or 04.)

Then, with the VCR in VCR position (the VCR/TV light will appear on the display panel), use the CHANNEL o/p buttons to select the channel you want to record at the VCR. Start the recording.

2

Press the VCR/TV button once to put the VCR in TV position. (The VCR/TV light will disappear.)

3

Select the channel you want to watch at the Cable Box/DBS.

Helpful Hint

•When you play a tape, make sure the Cable Box/DBS is set to the same channel as the CH3/CH4 switch on the VCR. Set the TV to the Cable Box/DBS output channel (03 or 04).

Image 9

Philips SVA102 Recording One Channel/Watching Another, Select the channel you want to watch at the Cable Box/DBS

Contents

Video Cassette Recorder For Customer Use Warranty Verification Features Safety PrecautionsIntroduction Table of Contents Using the Remote Control Putting Batteries in the Remote ControlVCR maintenance Replace the battery compartment lid Disconnect the antenna or cable from your TV Hookups Without a Cable Box/Direct Broadcast System Plug in the TV and the VCR Hookups Without a Cable Box/Direct Broadcast System cont’d Hookups With a Cable Box/Direct Broadcast System ConnectionsRecording/Viewing Any Channel Select the channel you want to watch at the Cable Box/DBS Recording One Channel/Watching Another Hookups With a Stereo TV 2Turn on the TV Turning on Your VCR Automatic Channel Setup Adding/Deleting Channels Automatic Channel Setup cont’d Follow the steps below to set your VCR’s clock. Make sure Setting the Clock 96-7 Setting the Clock cont’d Language Selection Press the Counter RESET/EXIT button OFF mode Press the Display button once Count mode Press the Display button once Clock modeOn-Screen Status Displays Power Button Remote Control ButtonsNumber Buttons Rental Selector Button Eject Button Counter RESET/EXIT ButtonAuto Repeat Button CLOCK/COUNTER Button VCR Display Panel Front Panel Rear Panel AC Power CordAudio OUT Jack Video OUT Jack Read and follow the steps below to play a tape Playing 1Turn on the TV Insert a tape Recording Stopping an OTR Starting an OTR Program Number → Once Daily Weekly Timer Recording Repeat the procedure in to set the recording’s end time Timer Recording cont’d 4Press the Counter RESET/EXIT button to exit Correcting a Timer Recording Cancelling a Timer Recording Auto Return Press the Play button or the Stop button repeatedly toSelect Auto Return To return to the channel being recorded, use the TV Press the VCR/TV button on the VCR remote control toPut the VCR in VCR position. The VCR/TV light will appear To stop recording, press the Stop button RF coaxial cable Rerecording Tape Duplication Repeat Play Forward and Reverse Searching SP/LP/SLP Special Effects PlaybackSuper High Speed Searching LP/SLP Viewing a Still Picture Rental Play Press the Play button to watch the tape Real-Time Counter Memory Automatic Playback Features Helpful Hints Helpful Hints cont’d Cable Box/DBS Output Channel Channel 3 or Glossary Specifications Video Cassette Recorder Limited Warranty Index Supplied Accessories