32Rerecording (Tape Duplication)
1.Audio cable from AUDIO OUT Jack of VCR 1 to AUDIO IN Jack of VCR 2
VCR 1
Playing VCR
1
|
| VCR 2 - Recording VCR |
|
|
| ANT |
|
| ANT |
| IN |
|
| IN |
AUDIO |
|
| AUDIO |
|
OUT IN | OUT |
| OUT IN | OUT |
VIDEO | CH3 CH4 |
| VIDEO | CH3 CH4 |
|
|
| ||
|
|
|
| 3. RF coaxial cable |
|
|
|
| from the OUT |
|
| 2. Video cable from VIDEO OUT Jack |
| jack of VCR 2 |
|
|
| to the TV’s | |
|
| of VCR 1 to VIDEO IN Jack of VCR 2 |
| |
|
|
| ANTENNA IN | |
|
|
|
| |
|
|
|
| Jack |
VCR 1 will play your tape. Insert a prerecorded tape in VCR 1. If the tape does not have a record tab, playback begins. If this happens, press the STOP/EJECT button on VCR 1 once.
2
VCR 2 will record your tape. Insert a blank tape in VCR 2. Make sure the record tab is intact (details are on page five). Make sure the VCR 2 power is on and VCR 2 is in VCR position. (The VCR/TV light will appear. If it does not, press the VCR/TV button once.)
3
Turn on the TV and set it to channel 3 or 4, whichever channel the CH3/CH4 switch on VCR 2 is set to.
4
Point the remote control at VCR 2. Press the Number buttons 0, 0. AUX will appear on the screen.
5
Point the remote control at VCR 2. Use the SPEED but- ton to select SP or SLP.
6
Press the PLAY button on VCR 1 and the REC(ord)/OTR button on VCR 2 at the same time.
7
To stop recording, press the STOP/EJECT button on VCR 2 once, then stop the tape on VCR 1.
Helpful Hints
•Unauthorized recording of copy- righted television programs, video tapes, or other materials may infringe on the rights of copyright owners and violate copyright laws.
•If a program has copy guard pro- tection, it may not record clearly.
•Audio and video cables are not sup- plied.
•The illustration uses two VCRs just like yours. Different VCRs may oper- ate differently.
