Philips SVA102 Remote Control Buttons, Power Button, Number Buttons, Rental Selector Button

18 Remote Control Buttons

POWER Button

Press to turn the VCR on or off.

Number Buttons

Use to select channels. Channels 1-9● To select, press 0, then press the channel number you want. For

example, to select channel 7, press 0, 7. Channels 100 and above ● To select, press the +100 button, then press the last two digits of

the channel you want. For example, to select channel 117, press the +100 button, 1, 7.

RENTAL SELECTOR Button

Press to set the Rental mode to ON or OFF during tape playback. Details are on page 35.

SPEED Button Press to select the recording speed (SP or SLP). Details are on pages 24 and 40.

POWER VCR/TV EJECT

1 2 3

4 5 6

7 8 9 CHANNEL

0 +100

RENTAL AUTO CLOCK/ SPEED SELECTOR REPEAT COUNTER

MENU DISPLAY EXIT COUNTER

RESET MEMORY

MENU Button Press repeatedly to access menus or to remove menus.

DISPLAY Button Press repeatedly to view the on-screen status displays. Details are on page 17.

REWIND Button When tape playback is stopped, press to rewind the tape at high speed. During tape playback, press to rewind the tape while the pic- ture stays on the screen. Details are on page 34.

Press to erase a timer recording. Details are on page 29. Press to add or delete channel numbers. Details are on page 13.

Press to go back one step when setting the clock or a timer recording.

RECORD Button

Press to start a recording. Details are on page 24.

PLAY Button Press to play a tape. Also, press to release Search or Still mode and to return to normal playback. Details are on page 34. Use to enter digits and information when programming a function in the on-screen menu (setting the clock, for example). Press to select

an item in the on-screen menu.

REWIND / PLAY F.FWD

RECORD / STOP PAUSE/STILL