Reducing picture disturbance(’optimizing the modulator’)
Youmay experience picture disturbance if you have not used
ascart cable to connect your video recorder and TV. This is
becauseanother TV station in your reception areamay
alreadybe using UHF-channel CH35 or 583MHz.
aSwitchon the TV set and select the programme number
forthe video recorder.
bMakesure that there is no cassette in the video recorder.
Onthe video recorder, press the STOP/EJECT?and
the PLAYGbuttons at the same time for a few seconds
untila channel frequency appears on the display. The
videorecorder will then transmit a test picture on this
channel.
INSTALLATION
OPTIMIZEMODULATOR
OPTIMIZE |CH35
MODULATOR ON
CHANNEL/FREQ. CH
________________________________
TOEXIT
PRESS MENU
cInthe line ’CHANNEL/FREQ.’, select ’CH’ or ’FREQ.’ using
themenu buttons Por Q.
dSelectthe line ’OPTIMIZE’ with the menu buttons P;or
P=.Press the menu button P.
eWhenthe video recorder finds a ’free’ TV channel, it will
showthe channel or frequency on the small
videorecorder display.
DYoucan also enter the channel or frequency using
buttons 0-9 .
fTunein the TV set to this channel or frequency.
gConfirmthe channel or frequency with the OK button.
hToend, press the MENUbutton.
Switching off the modulator
Ifyou cannot clear picture or sound interference, you can
switchoff the built-in modulator. You should only do this if you
haveconnected the video recorder to the TV set with a scart
cable.
DIfyou have Easy Link or NexTView, the modulator will be
switchedoff automatically.
aSwitchon the TV set and select the programme number
forthe video recorder.
bMakesure that there is no cassette in the video recorder.
Pressthe STOP/EJECT?and the PLAYGbuttonsat
thesame time for a few seconds until a channel
frequencyappears on the video recorder display.
cSelectthe line ’MODULATOR’ on the TV screen or ’M ON’
onthe video recorder display with the menu buttons
P;or P=.
dWiththe menu buttons Qor P,select’OFF’ on the
TVscreen or ’MOFF’ (modulator off) on the display.
eConfirmwith the OK button.
fToend, press the MENUbutton.
Using your video recorder remote controlwith your TV set
Yourvideo recorder remote control can transmit several
commandsto TV sets of different makes.
Byusing the TV buttons on the panel in the middle of the
control,you can:
Sp increaseor reduce the TV volume;
TVyswitch off the sound;
TVmswitch off the TV set; and
Ppchangethe channel
aPointthe remote control at the TV set.
18