Setting the time and date
Ifthe time shown on the video recorder display is not correct
or’--:--’ appears on the display, please follow these
instructions.
aSwitchon the TV set and select the programme number
forthe video recorder.
bPressthe MENU button.The main menu will appear.
cSelectthe line ’INSTALLATION’ with the menu buttons
P=or P;andconfirm with the Pbutton.
dSelectthe line ’TIME/DATE’ with the menu buttons
P=or P;andconfirm with the Pbutton.
INSTALLATION
TIME/DATE
TIME 20:00
YEAR |1998
MONTH 02
DATE 06
________________________________
TOEXIT
PRESS MENU
eAdjust’TIME’, ’YEAR’, ’MONTH’ and ’DATE’ using the
buttons 0-9 .Switch between each one with the menu
buttons P=or P;.
fConfirmeach entry with the OK button.
gToend, press the MENU button.
DIfa TV channel which transmits TXT/PDC is stored under
programmenumber ’P01’, the time and date will
automaticallybe taken from the TXT/PDC information.
On-screen display (OSD)
Withon-screen display the functions appear on the TV screen
asa menu. The most important buttons are shown at the
bottomof the screen.
ECallup the menu: with the MENU button.
ESelecta line: with the P=or P;button.
ESelectwithin a line: with the menu buttons Qor P.
EEnteror change: with the Qor Por with the 0-9
buttons.
EStore:with the OK button.
EConfirm:with the Pbutton.
EExitmenu: with the MENU button.
Formore details of OSD, please see ’On-screen display’
inchapter 5.
Emergency interrupt
Youcan use the mSTANDBY button on the video recorder or
remotecontrol to interrupt any function.
Soif you are having operating problems, you can just interrupt
thefunction and start again. And you can practise operating
yourvideo recorder without any worries. No matterwhich
buttonsyou press, you cannot damage it.
Important notes
EYoucan switch on with the STOP hbutton, the
0-9 buttonsor by putting in a cassette.
EKeepyour video recorder connected to the mains at all
timesso that it can make programmed recordings and the
televisionworks normally. Your video recorder uses less
than4 Watts in energy-savingmode.
EWhenthe video recorder is not plugged into the mains, it
willusually store TV channels for a year, and date and
timerinformation for seven hours.
Saving energy
Thereare two ways to switch to standby.
Normalmethod : Switch to standby using the
mSTANDBY button.The clock time will still be displayed.
Ifyou have not set the clock, ’--:--’ will appear.
Tosave energy : Press the mSTANDBY button twice. The clock
timewill disappear from the display.
7