Automatic tuning (autoinstall)
Yourvideo recorder will search for all TV channels. It stores
theTV channels it finds in the following order: BBC 1, BBC 2,
ITV,Channel 4, Channel 5, Sky, others.
Tuning in your video recorder for the firsttime
aIfyou have plugged the aerial into the video recorder,
pressthe OK buttonon the remote control. Then follow
theinstructions below from step e.
Tuning in your video recorder at other times
aSwitchon the TV set and select the programme number
forthe video recorder.
bPressthe MENU button.The main menu will appear.
cSelectthe line ’INSTALLATION’ with the menu buttons
P=or P;andconfirm with the Pbutton.
dSelectthe line ’AUTOINSTALL’ with the menu buttons
P=or P;andconfirm with the Pbutton.
eAutomatictuning will start. This can take severalminutes.
INSTALLATION
AUTOINSTALL
SEARCHINGFOR TV CHANNELS
03 CHANNELSFOUND
________________________
fWhenautomatic tuning is complete, ’AUTOINSTALL
COMPLETE’will appear on the TV screen.
gToend, press the MENU button.
Automatic TV channel store(FOLLOW TV)
Withthis function, the video recorder stores the channels in
thesame order as on the TV set. It only works if the video
recorder(socket AV1EXT1 )and the TV set are connected with
ascart cable. You must switch off any equipment connected
tosocket AV2EXT2 .
DIfyou are following the instructions on page 2 under
’Connectingwith a scart cable and Easy Link or
NexTView’,this function will start the transfer of
informationbetween the TV and the video recorder.
aSwitchon the TV set and select the programme number
forthe video recorder.
bPressthe MENU button.The main menu will appear.
cSelectthe line ’INSTALLATION’ with the menu buttons
P=or P;andconfirm with the Pbutton.
dSelectthe line ’FOLLOW TV’ with the menu buttons
P=or P;andconfirm with the Pbutton.
Checkthe message on the TV screen.
ePressthe OK button.
EIfthe video recorder recognises that the TV set has been
connectedwith a scart cable, ’TV 01’ will appear on the
videorecorder display.
EIf’NOTV’ (no signal from the TV set) appears on the video
recorderdisplay, this means that the TV channels cannot
betuned in automatically. In this case, please see
’Sortingand clearing TV channels manually’.
fSelectchannel ’1’ on the TV set.
gConfirmwith the OK buttonon the video recorder
remotecontrol. The video recorder will compare the
channelon the TV set and the video recorder.
Ifthe video recorder has found the same channel as the
TVset, it will store it as ’P01’.
hWaituntil, for example, ’TV 02’ appears.
iSelectthe next programme number on the TV set.
jConfirmwith the OK buttonon the video recorder
remotecontrol.
4