Problem solving (VIDEO Plus-Programming)

PROBLEMSOLUTION

Error message:

“SELECT PROG. NR.”

A correct PlusCode programming number has been entered - but automatic recognition of the correct TV channel has failed. Please enter the programme number under which your video recorder has stored the desired TV channel, using the buttons 0-9 and confirm with OK.

Error message: “PLUSCODE NUMBER NOT VALID“

Error message:

“MO-FR PROGRAMMING NOT POSSIBLE FOR WEEKEND”

Error message:

“SWITCH TO STANDBY - TIMER RECORDING”

Error message:

“NO CASSETTE“

The Pluscode programming number entered is incorrect or does not match the date entered. Please enter it again or finish with the STANDBY/ON button m.

The attribute “MO-FR” has been selected for a recording at the weekend.This is only possible for recordings from Monday to Friday. Please enter it again or finish

with the STANDBY/ON button m.

A recording was programmed, but the video recorder was not switched into

timer mode with the Standby button m. Press STANDBY/ON min order to make the programmed recording.Warning: if you do not do this, the video recorder will not record.

A recording was programmed, but there is no cassette in the machine. Insert a cassette ready for recording without erase protection.

Error message:

“ALL TIMERS OCCUPIED”

All the available memory locations in your video recorder for timer and VIDEO Plus programming are full. Delete a programmed recording (see chapter “Delete a programmed recording”).

“k” and/or “v” are flashing in the display of the video recorder

A recording was programmed, but there is no cassette in the machine. Insert a cassette ready for recording without erase protection.

A recording was programmed, but the video recorder was not switched into

timer mode with the Standby button m. Press STANDBY/ON min order to make the programmed recording.Warning: if you do not do this, the video recorder will not record.

Cassette is ejected after programming

Cassette is ejected during recording

The set cannot be used during recording

Year/month/date/time display appears

A cassette with erase protection was inserted. Please deactivate the erase protection or insert another cassette which is ready for recording.

The end of the tape was reached during a programmed recording.The recording could not be completed satisfactorily.

Once started, a recording can only be interrupted by pressing the STANDBY/ON

button m. WARNING: This will not only stop the recording, but it will also delete the programmed recording from the memory of the video recorder.

The time has not been set or not set correctly. After entering / confirming year, month, date and time, you can continue programming.

PROBLEM SOLVING (VIDEO PLUS-PROGRAMMING)

32

ENGLISH

 

Page 32
Image 32
Philips VR 260/07 operating instructions Problem solving Video Plus-Programming, Problemsolution