?
M 5 8 3
OPTIMIZE MODULATOR
OPTIMIZE FREQUENCY Q583P
MODULATORON
EXITPMENU STOREPOK
6Confirm the new modulator frequency with OK. In the display there will briefly appear “OK”. The screen will show “STORED”
Switching off the modulator |
|
If you have connected the video recorder to the TV set |
|
with a scart cable, you can switch off the modulator | FOR |
when there is interference with the picture or sound | |
(see below). | EXPERTS |
Switching the modulator on / off
If picture and sound interference cannot be removed by optimising the modulator, the integral modulator can be switched off.Warning: this is only possible if you have connected the video recorder to the TV set with a scart cable. It is not possible to operate with the modulator switched off without a scart cable.
1Switch the video recorder on and make sure there is no cassette in the video recorder
2Press at the same time the STOP button h on the remote control and the STOP/EJECT button ? on the front of the video recorder until the modulator frequency of the set appears in the display (e.g.: “M583” for 583 MHz)
3The video recorder will now transmit a test image on this frequency
4Use =P- or ;P+ to select the option
“MODULATOR”
5Use P or Q to select the setting “ON” (Modulator on) or “OFF” (Modulator off)
6Confirm with OK. In the display there will briefly appear “OK”. The screen will show “STORED”
ENGLISH | 47 | SWITCHING THE MODULATOR ON AND OFF |
|
