Problem solving (Timer programming)
PROBLEMSOLUTION
Error message:
“NO CASSETTE”
Error message:
“SWITCH TO STANDBY - TIMER RECORDING”
“k” and/or “v” are flashing in the display of the video recorder
A recording was programmed, but there is no cassette in the machine. Insert a cassette ready for recording without erase protection.
A recording was programmed, but the video recorder was not switched into
timer mode with the Standby button. Press STANDBY/ON m in order to make the programmed recording. Warning: if you do not do this, the video recorder will not record.
A recording was programmed, but there is no cassette in the machine. Insert a cassette ready for recording without erase protection.
A recording was programmed, but the video recorder was not switched into timer mode with the Standby button. Press STANDBY/ON m in order to make the programmed recording. Warning: if you do not do this, the video recorder will not record.
Error message:
“ALL TIMERS OCCUPIED“
All the available memory locations in your video recorder for timer and VIDEO Plus programming are full. Delete a programmed recording (see chapter “Delete / check / change programmed recordings”).
Cassette is ejected during recording
The end of the tape was reached during a programmed recording.The recording could not be completed satisfactorily.
Cassette is ejected after programming
The set cannot be used during recording
Year/month/date/time display appears
A cassette with erase protection was inserted. Please deactivate the erase protection or insert another cassette which is ready for recording.
Once started, a recording can only be interrupted by pressing the STANDBY/ON
button m. WARNING: This will not only stop the recording, but it will also delete the programmed recording from the memory of the video recorder.
The time has not been set or not set correctly. After entering / confirming year, month, date and time, you can continue programming.
Recording via external sources
If you want to watch or record transmissions from a satellite receiver, films from a video camera (or from other external devices), connect the device to the scart socket EXT1 AV1 or EXT2 AV2 and select the programme number on your video recorder “E1” or “E2”.
FOR
EXPERTS
ENGLISH | 35 | PROBLEM SOLVING (TIMER PROGRAMMING) |
|
