Connecting the video recorder | Philips VR 260/07 specification

2Connecting the video recorder

Preparing the remote control for operation

Aerial cable

Mains cable

Scart cable

1Take the remote control of the video recorder and the enclosed batteries (2 batteries)

2Open the battery compartment, insert the batteries as shown and then close the battery compartment.The remote control is now ready to use

Connecting to a TV set with a scart socket

1Have the following cables ready: An aerial cable (enclosed), a mains cable (enclosed) and a scart cable (enclosed)

What is a scart cable?
The scart or Euro-AV cable serves as the universal
recording and playback connector for picture-, sound-
and control signals.With this type of connection, there
is practically no loss of quality during the signal
transfer. We recommend that you use a scart cable	PARDON?
when using this video recorder.	PARDON?

2Switch off your TV set

3Remove the aerial cable plug from the back of

your TV set and insert it into the aerial socket 2 on the back of the video recorder

4Take the enclosed aerial cable and connect

the appropriate end to the aerial socket of your TV set and to the TV socket 3 on the back of the video recorder

ENGLISH	7	REMOTE CONTROL / CONNECTION WITH A SCART SOCKET

Image 7

Philips VR 260/07 operating instructions Connecting the video recorder, Preparing the remote control for operation

Contents

Table of contents With VR 260/07 Remote control Important notes for operation Introduction Most important functions of your new video recorder Important information for customers in Great Britain When using this video recorder Connecting the video recorderPreparing the remote control for operation Connecting to a TV set with a scart socket Confirm with OK Problem There is no test image Connecting additional devicesCheck the cable connections Setting TV channels, date and time for the first time Initial installation Following the corresponding instructions on Screen.PARDON? What is an on-screen menu?What is a channel, or a special channel? Searching for a TV channel manually Desired TV station What is a decoder?Allocating decoder Don’t know the channels for my TV stations This channel Using a satellite receiverCheck decoder allocation at a glance To which TV channel on the video recorder a decoder is Searching for TV channels automatically Settings Sorting and clearing of TV channels manually Additional 0.Therefore for 9 you must enter Changing the time and date General information Operating instructionsNavigation in the main menu Playing cassettes PlaybackPlaying back Ntsc cassettes Cassette 0000 hours / minutes Selecting tape position display typeWhat types of display are available to me? Display shows the playing time Remaining until the end Button G Reset / display tape position Later by pressing a button Bookmark at the appropriate place on the tape Immediately to playback Play compact VHS cassettes Still picture / slow motion Optimizing tracking Removing picture interferenceOptimizing still picture Manual recording Starting recording manually Stopping automatically Duration of the programmed recording, Lining up manual recordingsSelecting the recording speed Standard Play / Long Play / Auto Long Play Is practically no loss of quality during transfer. We Recording automatically from a satellite receiver That direct recordings are not possible Is switched offActivate / deactivate direct recording Cannot select on or OFF Making a direct recording Programmed recordings Programming timer with Video Plus+ Even if they are rescheduled. In the input field Signals on * or offExplains how to set the desired recording speed Activate VPS/PDC Problemsolution Problem solving Video Plus-Programming Friday or WEEK. for recordings which are Programming timer without Video Plus+What is a memory location? Store up to six timer programmings Programming Timer Without Video Plus English And/or v are flashing in the display of the video recorder Problem solving Timer programming Turbo Timer-Recording Problem solving Turbo Timer programming Delete / check / change programmed recordings Using the NexTView LinkIt has been manually deleted Adjusting the child lock Adjusting automatic switch-off10Other functions Repeat Play Replaying cassette continuously Select Auto Changing the TV systemTV systems Process and show several transmission systems Instructions on the screen Adjusting the OSD informationWhat is an OSD? On-screen menu by following the corresponding Energy-saving mode Both video recorders is possible once more Adapting remote controlFactory setting of the video recorder is VCR Recorder. Each button has been allocated a specific Remote Control Codes Using the TV remote control Optimizing the modulator These signals are transmittedDisplay.PROBLEM 11Suppressing interference When there is interference with the picture or sound Switching the modulator on / offSwitching off the modulator With a scart cable, you can switch off the modulator 12Before you call an engineer Possible Cause / Solution English English Video recorder / display English