Pinnacle Speakers Wireless Network Music Player Status, When YOU are Finished Using Soundbridge

Status

Use this page to view the version of software currently running on your SoundBridge. You can also review your network connection information, including IP address and MAC addresses.

If you are using a Wi-Fi connection, this page will display your Wi-Fi signal strength and the name of the network to which you are connected. When you are finished using your web page, simply close your browser window.

SECTION 8: WHEN YOU ARE FINISHED USING SOUNDBRIDGE

When you are finished playing music and using your SoundBridge altogether, just press the Standby [ ] button on your remote. In Standby mode, SoundBridge can display the date and time or a blank display, depending on your preference.

If you were playing Internet radio when you pressed Standby, then pressing Standby again will resume playback of that station. Otherwise it will return you to the music library to which you were most recently connected.

If you plan to disconnect SoundBridge from AC power after you are done using it, be sure to press the Standby button first. This logs you out of the music server software running on your computer.

Note: Wait approximately 10 seconds after pressing Standby [ ] before unplugging SoundBridge; this gives SoundBridge time to flush its settings for a clean reboot.

8

38 Section 7: SoundBridge Web Interface Section 8: When You Are Finished Using SoundBridge 39