Connecting the Unit

Connecting the Power Terminal

Always use the recommended battery and ground wire, which is sold separately. Connect the battery wire directly to the car battery positive terminal

(+) and the ground wire to the car body.

Recommended wires size (AWG: American Wire Gauge) is as follows. The battery wire, the ground wire and the optional direct ground wire must be same size.

Use a 10 AWG to 20 AWG wire for the system remote control wire.

Battery Wire and Ground Wire Size

Wire Length

less than 3.6 m

less than 6.4 m

Wire Size

6 AWG

4 AWG

 

 

 

1.Pass the battery wire from the engine compartment to the interior of the vehicle.

After making all other connections to the amplifier, connect the battery wire terminal of the amplifier to the positive (+) terminal of the battery.

The maximum length of the wire between the fuse and the positive (+) terminal of the battery is 45 cm.

 

 

Engine

 

Interior of

 

 

 

the vehicle

 

 

compartment

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Positive (+)

Fuse 200 A

Drill a 14

Each amplifier must

terminal

be SEPARATELY

mm hole into

 

fused at 200 A.

the vehicle

 

 

body.

Insert the O-ring rubber grommet into the vehicle body.

2.Expose the end of wires using nip- pers or a cutter.

Battery wire, ground wire: 18 mm to 20 mm

System remote control wire: 14 mm to 16 mm

3.Connect the wires to the terminal.

Fix the wires securely with the terminal screws.

System remote

 

control terminal

Terminal

Power terminal

screw

 

GND

Battery wire

terminal

Ground wire System remote

control wire

WARNING

Failure to securely fasten the battery wire to the ter- minal using the terminal screws could cause the ter- minal area to overheat and could result in damage and injury including minor burns.

4.Put the wire ties in the slits and wrap the wire ties around the wires.

Wrap the wire tie around the wire insulation, not the stripped wire.

Cut off any excess portions of the wire ties.

Wire tie

9

Page 10
Image 10
Pioneer D1200SPL owner manual Connecting the Power Terminal, Expose the end of wires using nip- pers or a cutter, Gnd

D1200SPL specifications

The Pioneer D1200SPL is a highly regarded subwoofer that has made significant waves in the audio equipment market. Known for its incredible performance and deep, resonant bass, this model is engineered to meet the demands of serious audiophiles and professional sound systems alike.

One of the standout features of the D1200SPL is its impressive power handling capability. It boasts a peak power rating of 3,000 watts, which allows for high-volume playback without distortion. This makes it an ideal choice for car audio enthusiasts who seek to create a powerful sound system that can fill any environment with robust bass. The subwoofer is designed to handle sustained bass frequencies, making it suitable for various music genres, particularly those that rely heavily on low-end sounds.

The D1200SPL incorporates advanced technologies that enhance its performance. The subwoofer is equipped with a dual voice coil design, which improves the efficiency of the speaker and allows for more precise sound reproduction. This setup enables users to wire the subwoofer in multiple configurations, providing flexibility depending on the vehicle's audio system requirements.

Additionally, the D1200SPL features a sturdy construction that helps to withstand the rigors of daily use. It comes with a reinforced rubber surround that enhances the durability of the subwoofer while ensuring consistent performance. The heavy-duty cone is designed to produce smooth and powerful bass, while the die-cast aluminum frame aids in reducing unwanted vibrations, resulting in cleaner sound.

Another compelling aspect of the D1200SPL is its frequency response range, which extends from 20 Hz to 1 kHz. This wide range allows listeners to experience heavy bass notes with clarity, making the audio experience immersive and rewarding. The subwoofer also includes a vented pole piece, facilitating proper airflow and minimizing overheating during operation, thus prolonging its lifespan.

Pioneer's commitment to innovation is evident in the D1200SPL, as it combines cutting-edge technologies with user-friendly features. This subwoofer is compatible with a variety of amplifiers, allowing for easy integration into existing audio setups. Furthermore, its sleek design ensures that it not only performs well but also looks good in any installation.

In conclusion, the Pioneer D1200SPL represents a superb choice for those seeking an extraordinary listening experience. Its combination of power, durability, and sound quality makes it a must-have for bass enthusiasts and an essential piece of equipment for any serious audio setup. Whether for car audio systems or home theater setups, the D1200SPL continues to impress with its outstanding performance and innovative features.