In case of trouble

When the unit does not operate properly, contact your dealer or the nearest autho- rized PIONEER Service Station.

About This Product

This product is a class D amplifier for the subwoofer. If both L (left) and R (right) channels are connected to the RCA input of this product, output is mixed because this product is a mono amplifier.

CAUTION

Never replace the fuse with one of greater value or rating than the original fuse. Use of an improper fuse could result in overheating and smoke and could cause damage to the product and injury including burns.

Use the supplied hexagonal wrench to tighten screws when fastening wires to the terminal or when changing the direction of the badge. The use of a long, commercially available hexagonal wrench can cause excessive torque to be applied possibly resulting in damage to terminals and wires.

WARNING

Always use the recommended battery wire and ground wire, which is sold separately. Connect the battery wire directly to the car battery positive terminal (+) and the ground wire to the car body.

Do not touch the amplifier with wet hands. Otherwise you may get an electric shock. Also, do not touch the amplifier when it is wet.

For traffic safety and to maintain safe driving conditions, keep the volume low enough so that you can still hear normal traffic sound.

Check the connections of the power supply and speakers if the fuse of the separately sold battery wire or the amplifier fuse blows. Detect the cause and solve the problem, then replace the fuse with another one of the same size and rating.

To prevent malfunction of the amplifier and subwoofer, the protective circuit will cut the power supply to the amplifier (sound will stop) when an abnormal condition occurs. In such a case, switch the power to the system OFF and check the connection of the power supply and subwoofer. Detect the cause and solve the problem.

Contact the dealer if you cannot detect the cause.

To prevent an electric shock or short-circuit during connection and installation, be sure to disconnect the negative (–) terminal of the battery beforehand.

Confirm that no parts are behind the panel when drilling a hole for installation of the amplifier. Be sure to protect all cables and important equipment such as fuel lines, brake lines and the electrical wiring from damage.

DO NOT allow amplifier to come into contact with liquids due to, for example, the location where the amplifier is installed. Electrical shock could result. Also, amplifier and speaker damage, smoke, and overheating could result from contact with liquids. In addition, the amplifier surface and the surface of any attached speakers could become hot to the touch and minor burns could result.

ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS êìëëäàâ

2

Page 3
Image 3
Pioneer D1200SPL owner manual Case of trouble, About This Product

D1200SPL specifications

The Pioneer D1200SPL is a highly regarded subwoofer that has made significant waves in the audio equipment market. Known for its incredible performance and deep, resonant bass, this model is engineered to meet the demands of serious audiophiles and professional sound systems alike.

One of the standout features of the D1200SPL is its impressive power handling capability. It boasts a peak power rating of 3,000 watts, which allows for high-volume playback without distortion. This makes it an ideal choice for car audio enthusiasts who seek to create a powerful sound system that can fill any environment with robust bass. The subwoofer is designed to handle sustained bass frequencies, making it suitable for various music genres, particularly those that rely heavily on low-end sounds.

The D1200SPL incorporates advanced technologies that enhance its performance. The subwoofer is equipped with a dual voice coil design, which improves the efficiency of the speaker and allows for more precise sound reproduction. This setup enables users to wire the subwoofer in multiple configurations, providing flexibility depending on the vehicle's audio system requirements.

Additionally, the D1200SPL features a sturdy construction that helps to withstand the rigors of daily use. It comes with a reinforced rubber surround that enhances the durability of the subwoofer while ensuring consistent performance. The heavy-duty cone is designed to produce smooth and powerful bass, while the die-cast aluminum frame aids in reducing unwanted vibrations, resulting in cleaner sound.

Another compelling aspect of the D1200SPL is its frequency response range, which extends from 20 Hz to 1 kHz. This wide range allows listeners to experience heavy bass notes with clarity, making the audio experience immersive and rewarding. The subwoofer also includes a vented pole piece, facilitating proper airflow and minimizing overheating during operation, thus prolonging its lifespan.

Pioneer's commitment to innovation is evident in the D1200SPL, as it combines cutting-edge technologies with user-friendly features. This subwoofer is compatible with a variety of amplifiers, allowing for easy integration into existing audio setups. Furthermore, its sleek design ensures that it not only performs well but also looks good in any installation.

In conclusion, the Pioneer D1200SPL represents a superb choice for those seeking an extraordinary listening experience. Its combination of power, durability, and sound quality makes it a must-have for bass enthusiasts and an essential piece of equipment for any serious audio setup. Whether for car audio systems or home theater setups, the D1200SPL continues to impress with its outstanding performance and innovative features.