Installation

CAUTION

• Do not install in:

—Places where it could injure the driver or pas- sengers if the vehicle stops suddenly.

—Places where it may interfere with the driver,

such as on the floor in front of the driver’s seat.

Make sure that wires are not caught in the sliding mechanism of the seats, resulting in a short-cir- cuit.

Confirm that no parts are behind the panel when drilling a hole for installation of the amplifier. Protect all cables and important equipment such as fuel lines, brake lines and electrical wiring from damage.

Install tapping screws in such a way that the screw tip does not touch any wire. This is impor- tant to prevent wires from being cut by vibration of the car, which can result in fire.

DO NOT allow amplifier to come into contact with liquids due to, for example, the location where the amplifier is installed. Electrical shock could result. Also, amplifier and speaker damage, smoke, and overheating could result from contact with liquids. In addition, the amplifier surface and the surface of any attached speakers could become hot to the touch and minor burns could result.

To ensure proper installation, use the supplied parts in the manner specified. If any parts other than the supplied ones are used, they may damage internal parts of the amplifier, or they may become loose causing the amplifier to shut down.

Never replace the fuse with one of greater value or rating than the original fuse. Use of an improp- er fuse could result in overheating and smoke and could cause damage to the product and injury including burns.

CAUTION

To prevent malfunction and/or injury

To ensure proper heat dissipation of the amplifier, be sure of the following during installation.

—Allow adequate space above the amplifier for proper ventilation.

—Do not cover the amplifier with a floor mat or carpet.

DO NOT allow amplifier to come into contact with liquids due to, for example, the location where the amplifier is installed. Electrical shock could result. Also, amplifier and speaker damage, smoke, and overheating could result from contact with liquids. In addition, the amplifier surface and the surface of any attached speakers could become hot to the touch and minor burns could result.

Do not install the amplifier on unstable places such as the spare tire board.

The best location for installation differs with the car model and installation location. Secure the amplifier at a sufficiently rigid location.

Make temporary connections first and check that the amplifier and the system operate properly.

After installing the amplifier, confirm that the spare tire, jack and tools can be easily removed.

Attaching the Bass boost remote control

Attach with tapping screws (3 mm 10 mm) at an easily accessible location such as under the dash- board.

Tapping screw (3 mm 10 mm)

15

Page 16
Image 16
Pioneer D1200SPL owner manual Installation, Attaching the Bass boost remote control, To prevent malfunction and/or injury

D1200SPL specifications

The Pioneer D1200SPL is a highly regarded subwoofer that has made significant waves in the audio equipment market. Known for its incredible performance and deep, resonant bass, this model is engineered to meet the demands of serious audiophiles and professional sound systems alike.

One of the standout features of the D1200SPL is its impressive power handling capability. It boasts a peak power rating of 3,000 watts, which allows for high-volume playback without distortion. This makes it an ideal choice for car audio enthusiasts who seek to create a powerful sound system that can fill any environment with robust bass. The subwoofer is designed to handle sustained bass frequencies, making it suitable for various music genres, particularly those that rely heavily on low-end sounds.

The D1200SPL incorporates advanced technologies that enhance its performance. The subwoofer is equipped with a dual voice coil design, which improves the efficiency of the speaker and allows for more precise sound reproduction. This setup enables users to wire the subwoofer in multiple configurations, providing flexibility depending on the vehicle's audio system requirements.

Additionally, the D1200SPL features a sturdy construction that helps to withstand the rigors of daily use. It comes with a reinforced rubber surround that enhances the durability of the subwoofer while ensuring consistent performance. The heavy-duty cone is designed to produce smooth and powerful bass, while the die-cast aluminum frame aids in reducing unwanted vibrations, resulting in cleaner sound.

Another compelling aspect of the D1200SPL is its frequency response range, which extends from 20 Hz to 1 kHz. This wide range allows listeners to experience heavy bass notes with clarity, making the audio experience immersive and rewarding. The subwoofer also includes a vented pole piece, facilitating proper airflow and minimizing overheating during operation, thus prolonging its lifespan.

Pioneer's commitment to innovation is evident in the D1200SPL, as it combines cutting-edge technologies with user-friendly features. This subwoofer is compatible with a variety of amplifiers, allowing for easy integration into existing audio setups. Furthermore, its sleek design ensures that it not only performs well but also looks good in any installation.

In conclusion, the Pioneer D1200SPL represents a superb choice for those seeking an extraordinary listening experience. Its combination of power, durability, and sound quality makes it a must-have for bass enthusiasts and an essential piece of equipment for any serious audio setup. Whether for car audio systems or home theater setups, the D1200SPL continues to impress with its outstanding performance and innovative features.