Playing a CD
Theseare the basic steps necessar y to play a
CDwith your built-in CD player. More ad-
vancedCD operation is explained starting on
thenext page.
1Playtime indicator
Showsthe elapsed playing time of the cur-
renttrack.
2Tracknumber indicator
Showsthe track currently playing.
1 PressOPEN to open the front panel.
CDloading slot appears.
#Aftera CD has been inserted, press SOURCE
toselect the built-in CD player.
2 Inserta CD into the CD loading slot.
Playbackwill automatically start.
CDloading slot
EJECTbutton
#Youcan eject a CD by pressing EJECT.
#Toavoid a malfunction, make sure that no
metalobject comes into contact with the term-
inalswhen the front panel is open.
3 Closethe front panel.
4 UseVOLUME to adjust the sound level.
Rotateto increase or decrease the volume.
5 Toperform fast forward or reverse,
pressand hold cor d.
#Ifyou select the search method to ROUGH,
pressingand holding cor denables you to
searchevery ten track in the current disc. (Refer
toSelecting the search method on page 17.)
6 Toskip back or forward to another
track,press cor d.
Pressingdskips to the start of the next track.
Pressingconce skips to the start of the cur-
renttrack. Pressing again will skip to the pre-
vioustrack.
Notes
!Thebuilt-in CD player plays one, standard, 12-
cmor 8-cm (single) CD at a time. Do not use
anadapter when playing 8-cm CDs.
!Donot insert anything other than a CD into
theCD loading slot.
!Ifyou cannot insert a disc completely or if
afteryou insert a disc the disc does not play,
checkthat the label side of the disc is up.
PressEJECT to eject the disc, and check the
discfor damage before inserting the disc
again.
!Ifthe built-in CD player does not operate prop-
erly,an error message such as ERROR-11
maybe displayed. Refer to Understanding
built-inCD player error messages on page 39.
!Whena CD TEXT disc is inserted, the disc and
tracktitles begin to scroll to the left auto-
matically.
Built-in CD Player
En 15
English
Section
05