Adjusting initial settings
Initialsettings lets you per form initial set up of
differentsettings for this unit.
1Functiondisplay
Showsthe function status.
1 PressSOURCE and hold until the unit
turnsoff.
2 PressFUNCTION and hold until the
clockappears in the display.
3 PressFUNCTION to select one of the in-
itialsettings.
PressFUNCTION repeatedly to switch be-
tweenthe following settings:
ClockWARN(warning tone)AUX (auxili-
aryinput)
Usethe following instructions to operate each
particularsetting.
#Tocancel initial settings, press BAND.
#Youcan also cancel initial settings by holding
downFUNCTION until the unit turns off.
Setting the clock
Usethese instructions to set the clock.
1 PressFUNCTION to select clock.
PressFUNCTION repeatedly until clock ap-
pearsin the display.
2 Presscor dto select the segment of
theclock display you wish to set.
Pressingcor dwill select one segment of the
clockdisplay:
HourMinute
Asyou select segments of the clock display
thesegment selected will blink.
3 Pressaor bto set the clock.
Pressingawill increase the selected hour or
minute.Pressing bwill decrease the selected
houror minute.
Switching the warning tone
Ifthe front panel is not detached fromthe
headunit within five seconds of turning off the
ignition,a warning tone will sound. You can
turnoff the warning tone.
1 PressFUNCTION to select WARN.
PressFUNCTION repeatedly until WARN ap-
pearsin the display.
2 Pressaor bto turn WARN on or off.
Pressingaor bwill turn WARN on or off and
thatstatus will be displayed (e.g.,
WARN:ON).
Switching the auxiliary setting
Itis possible to use auxiliar y equipment with
thisunit. Activate the auxiliar y setting when
usingauxiliary equipment connectedto this
unit.
1 PressFUNCTION to select AUX.
PressFUNCTION repeatedly until AUX ap-
pearsin the display.
2 Pressaor bto turn AUX on or off.
Pressingaor bwill turn AUX on or off and
thatstatus will be displayed (e.g.,
AUX:ON).
Initial Settings
En
36
Section
09