Pioneer DEH-P460MP Recalling equalizer curves, Adjusting equalizer curves, Fine adjusting equalizer curve

Recalling equalizer curves
Thereare six stored equalizer curves which
youcan easily recall at any time. Here is a list
ofthe equalizer curves:
Display Equalizercurve
SPR-BASS Superbass
POWERFUL Powerful
NATURAL Natural
VOCAL Vocal
CUSTOM Custom
EQFLAT Flat
!CUSTOMis an adjusted equalizer cur ve
thatyou create.
!Aseparate CUSTOM curve canbe created
foreach source. (The built-in CD player and
themulti-CD player are set to the same
equalizeradjustment setting automati-
cally.)If you make adjustments, the equali-
zercurve settings willbe memorized in
CUSTOM.
!WhenEQ FLAT is selected no supplement
orcorrection is made to the sound. This is
usefulto check the effect of the equalizer
curvesby switching alternativelybetween
EQFLAT and a set equalizer curve.
%PressEQ to select the equalizer.
PressEQ repeatedly to switch between the fol-
lowingequalizers:
SPR-BASSPOWERFULNATURAL
VOCALCUSTOMEQFLAT
Adjusting equalizer curves
Youcan adjust the currently selected equalizer
curvesetting as desired.Adjusted equalizer
curvesettings are memorized inCUSTOM.
1 PressAUDIO to select EQ.
PressAUDIO until EQ appears in the display.
2 Presscor dto select the equalizer
bandto adjust.
Eachpress of cor dselects equalizer bands
inthe following order:
EQ-L(low)EQ-M (mid)EQ-H (high)
3 Pressaor bto adjust the level of the
equalizerband.
Eachpress of aor bincreases or decreases
thelevel of the equalization band.
+66is displayed as the level is increased
ordecreased.
#Youcan then select another band and adjust
thelevel.
Note
Ifyou make adjustments when a cur ve other than
CUSTOMis selected, the newly adjusted curve
willreplace the previous curve. Then a new curve
withCUSTOM appears on the display while se-
lectingthe equalizer curve.
Fine adjusting equalizer curve
Youcan adjust the center frequency and the Q
factor(curve characteristics) ofeach currently
selectedcurve band (EQ-L/EQ-M/EQ-H).
Level (dB)
Center frequency
Q=2N Q=2W
Frequency (Hz)
1 PressAUDIO and hold until frequency
andthe Q factor (e.g., F- 80:Q1W) appears
inthe display.
2 PressAUDIO to select the desired band
foradjustment.
LowMidHigh
Audio Adjustments
En 33
English
Section
08