3 Presscor dto select the desired fre-
quency.
Presscor duntil the desired frequency ap-
pearsin the display.
Low:4080100160 (Hz)
Mid:2005001k2k (Hz)
High:3k8k10k12k (Hz)
4 Pressaor bto select the desired Q fac-
tor.
Pressaor buntil the desired Q factor ap-
pearsin the display.
2N1N1W2W
Note
Ifyou make adjustments when a cur ve other than
CUSTOMis selected, the newly adjusted curve
willreplace the previous curve. Then a new curve
withCUSTOM appears on the display while se-
lectingthe equalizer curve.
Adjusting loudness
Loudnesscompensates for deficiencies in the
low-and high-sound ranges at low volume.
1 PressAUDIO to select LOUD.
PressAUDIO until LOUD appears in the dis-
play.
2 Pressato turn loudness on.
Loudnesslevel (e.g., LOUD :MID) appears in
thedisplay.
3 Presscor dto select a desired level.
Eachpress of cor dselects level in the fol-
lowingorder:
LOW(low)MID (mid)HI (high)
4 Pressbto turn loudness off.
LOUD:OFF appears in the display.
Note
Youcan also turn loudness on or off by pressing
LOUDNESS.
Front image enhancer (F.I.E.)
TheF.I.E. (Front Image Enhancer) function is a
simplemethod of enhancing front imaging by
cuttingmid- and high-range frequency output
fromthe rear speakers, limiting their output to
low-rangefrequencies. You can select the fre-
quencyyou want to cut.
Precaution
Whenthe F.I.E. function is deactivated, the rear
speakersoutput sound of all frequencies, not just
basssounds. Reduce the volume before disenga-
gingF.I.E. to prevent a sudden increase in vo-
lume.
1 PressAUDIO to select FIE.
PressAUDIO until FIE appears in the display.
2 Pressato turn F.I.E. on.
#Toturn F.I.E.off, press b.
3 Presscor dto select a desired fre-
quency.
Eachpress of cor dselects frequency in the
followingorder:
100160250(Hz)
Notes
!Afterturning the F.I.E. function on, use the bal-
anceadjustment (refer to page 32) and adjust
frontand rear speaker volume levels until they
arebalanced.
!Turnthe F.I.E.function off when using a 2-
speakersystem.
Audio Adjustments
En
34
Section
08