Pioneer DEH-P690UB Operating this unit, Basic Operations, Power ON/OFF, Selecting a source

Operating this unit

d Joystick	Basic Operations
Move to perform manual seek tuning, fast	Power ON/OFF
forward, reverse and track search controls.
Also used for controlling functions.	Turning the unit on
Functions are the same as
	% Press SOURCE to turn the unit on.
MULTI-CONTROL except for volume con-
trol.
e DIRECT button	Turning the unit off
	% Press SOURCE and hold until the unit
Press to directly select the desired track.
	turns off.
f CLEAR button
Press to cancel the input number when 0 to	Selecting a source
9 are used.
	You can select a source you want to listen to.
g 0 to 9 buttons
	To switch to the built-in CD player, load a disc
Press to directly select the desired track,	in the unit (refer to page 14).
preset tuning or disc. Buttons 1 to 6 can op-	% Press SOURCE to select a source.
erate the preset tuning for the tuner or disc
number search for the multi-CD player.	Press SOURCE repeatedly to switch between
h PGM button	the following sources:
	XM tuner—SIRIUS tuner—Tuner—Televi-
Press to operate the preprogrammed func-	sion—DVD player/Multi-DVD player—
tions for each source. (Refer to Using the	Built-in CD player—Multi-CD player—
PGM button on page 34.)	iPod—USB—External unit 1—External
i ATT button	unit 2—AUX1—AUX2—BT Audio—BT Tel-
	ephone
Press to quickly lower the volume level, by
about 90%. Press once more to return to the	Notes
original volume level.
j ENTERTAINMENT button	! In the following cases, the sound source will
	not change:
Press to change to the entertainment dis-	— When there is no unit corresponding to the
play.	selected source connected to this unit.
k AUDIO button	— When there is no disc or magazine in the
	player.
Press to select various sound quality con-
	— When the AUX (auxiliary input) is set to off
trols.
	(refer to page 30).
	— When the BT Audio source is set to off
	(refer to Activating the BT Audio source on
	page 32).
	! AUX1 is set to on by default. Turn off the AUX1
	when not in use (refer to Switching the auxili-
	ary setting on page 30).
	! Charging the portable audio player using
	car’s DC power source while connecting it to
	AUX input may generate noise. In this case,
	stop charging.

Section

02

English

En 11