Pioneer DEH-P690UB operation manual Selecting a track directly, Eject, Clear

Operating this unit

Section

02

Disc loading slot

2Insert a CD (CD-ROM) into the disc load- ing slot.

Front panel is closed automatically, and play-

back will start.

# Be sure to turn up the label side of a disc.

# After a CD (CD-ROM) has been inserted, press

SOURCE to select the built-in CD player.

# You can eject a CD (CD-ROM) by pressing

EJECT.

3Push MULTI-CONTROL up or down to select a folder when playing a compressed

audio.

# You cannot select a folder that does not have

a compressed audio file recorded in it.

# To return to folder 01 (ROOT), press and hold BAND. However, if folder 01 (ROOT) contains no files, playback commences with folder 02.

4To perform fast forward or reverse, push and hold MULTI-CONTROL left or

right.

# If you select Rough search, pushing and hold- ing MULTI-CONTROL left or right enables you to search every 10 tracks in the current disc (folder). (Refer to Searching every 10 tracks in the current disc or folder on page 17.)

5To skip back or forward to another track, push MULTI-CONTROL left or right.

Notes

!There is sometimes a delay between starting up disc playback and the sound being issued. When being read, Format read is displayed.

!If an error message such as ERROR-11 is dis- played, refer to Error messages on page 63.

!When playing CD-EXTRA or MIXED-MODE CDs, compressed audio and CD-DA can be switched by pressing BAND.

!If you have switched between compressed audio and CD-DA, playback starts at the first track on the disc.

!When playing back VBR (variable bit rate) re- corded files, elapsed play time may not be dis- played correctly.

!When playing compressed audio, there is no sound on fast forward or reverse.

!When a CD TEXT disc is inserted, the disc and track titles automatically begin to scroll in the display. When Ever Scroll is set to ON at the initial setting, the disc and track titles scroll continuously. About Ever Scroll, refer to Switching the Ever Scroll on page 32.

!Playback is carried out in order of file number. Folders are skipped if they contain no files. (If folder 01 (ROOT) contains no files, playback commences with folder 02.)

Selecting a track directly

When using the remote control, you can select a track directly by entering the desired track number.

!When audio files are being played back, you can select track in the current folder.

1 Press DIRECT.

Track number input display appears.

2Press 0 to 9 buttons to enter the desired

track number.

# You can cancel the input number by pressing

CLEAR.

3Press DIRECT.

The track of entered number will play.

#After entering the number input mode, if you do not perform an operation within about eight seconds, the mode is automatically canceled.

English

En 15