Pioneer DEH-P690UB Selecting the display language, Setting the clock, Switching the warning tone

Section

02Operating this unit

Selecting the display language

For your convenience, this unit equips multi- ple language display. You can select the lan- guage best suited to your first language.

1Use MULTI-CONTROL to select Language select.

2Press MULTI-CONTROL to select the lan- guage.

Each press of MULTI-CONTROL selects lan- guages in the following order: English—Français—Español

Setting the clock

Use these instructions to set the clock.

1Use MULTI-CONTROL to select Clock.

2Push MULTI-CONTROL left or right to select the segment of the clock display you wish to set.

Pushing MULTI-CONTROL left or right will se- lect one segment of the clock display: Hour—Minute

As you select segments of the clock display the segment selected will blink.

3Push MULTI-CONTROL up or down to put a clock right.

Note

1Use MULTI-CONTROL to select Warning tone.

2Press MULTI-CONTROL to turn warning

tone on.

# To turn warning tone off, press MULTI-CONTROL again.

Switching the face auto open

To protect against theft, this unit features de- tachable front panel. To detach the front panel easily, the front panel opens automatically. This function is on as a default.

1Use MULTI-CONTROL to select Face auto open.

2Press MULTI-CONTROL to turn the face

auto open on.

# To turn the face auto open off, press MULTI-CONTROL again.

Switching the auxiliary setting

Auxiliary equipments connected to this unit can be activated individually. Set each AUX source to ON when using. About connecting or using auxiliary equipments, refer to Using the AUX source on page 33.

1Use MULTI-CONTROL to select AUX1/ AUX2.

You can match the clock to a time signal by pressing MULTI-CONTROL.

!If the minute is 00 to 29, the minutes are rounded down. (e.g., 10:18 becomes 10:00.)

!If the minute is 30 to 59, the minutes are rounded up. (e.g., 10:36 becomes 11:00.)

2Press MULTI-CONTROL to turn AUX1/

AUX2 on.

# To turn AUX off, press MULTI-CONTROL again.

Switching the dimmer setting

Switching the warning tone

If the front panel is not detached from the head unit within four seconds of turning off the ignition, a warning tone will sound. You can turn off the warning tone.

To prevent the display from being too bright at night, the display is automatically dimmed when the car’s headlights are turned on. You can turn the dimmer on or off.

1 Use MULTI-CONTROL to select Dimmer.

30 En