Pioneer DEH-P690UB operation manual Switching the reverse mode Activating the BT Audio source

Section

02Operating this unit

Notes

!Remember that if the feature demo continues operating when the car engine is turned off, it may drain battery power.

!You can also turn on or off feature demo by pressing DISPLAY while this unit is turned off. For more details, see Feature demo mode on page 9.

Switching the reverse mode

Activating the BT Audio source

You need to activate the BT Audio source in order to use a Bluetooth audio player.

!Only when Bluetooth adapter (e.g. CD- BTB100) is connected to this unit, you can operate this function.

1Use MULTI-CONTROL to select

BT AUDIO.

2Press MULTI-CONTROL to turn the BT Audio source on.

If you do not perform an operation within about 30 seconds, screen indications start to reverse, and then continue reversing every 10 seconds.

1Use MULTI-CONTROL to select Reverse mode.

2Press MULTI-CONTROL to turn the re-

verse mode on.

# To turn the reverse mode off, press MULTI-CONTROL again.

Note

You can also turn on or off reverse mode by press- ing BAND while this unit is turned off. For more details, see Reverse mode on page 8.

Switching the Ever Scroll

When Ever Scroll is set to ON, CD text infor- mation scrolls continuously in the display. Set to OFF if you prefer the information to scroll just once.

1Use MULTI-CONTROL to select Ever-scroll.

2Press MULTI-CONTROL to turn the Ever

Scroll on.

# To turn the Ever Scroll off, press

#To turn the BT Audio source off, press MULTI-CONTROL again.

Entering PIN code for Bluetooth wireless connection

To connect your cellular phone to this unit via Bluetooth wireless technology, you need to enter PIN code on your phone to verify the connection. The default code is 0000, but you can change this in this function.

!With some Bluetooth audio players, you may be required to enter to this unit in ad- vance PIN code of your Bluetooth audio player, in order to set this unit ready for a connection from your Bluetooth audio player.

!Only when Bluetooth adapter (e.g. CD- BTB100) is connected to this unit, you can operate this function.

1Use MULTI-CONTROL to select Pin code input.

2Push MULTI-CONTROL up or down to select a number.

3Push MULTI-CONTROL left or right to move the cursor to the previous or next po- sition.

MULTI-CONTROL again.	4 After inputting PIN code (up to 16 di-
	gits), press MULTI-CONTROL.
	PIN code you entered is now standby to be
	stored in memory.

32 En