Pioneer DEH-P690UB Other Functions, Using the AUX source, About AUX1 and AUX2, AUX1 source

Operating this unit

When you press MULTI-CONTROL again on	Other Functions
the same display, the PIN code you entered is	Using the AUX source
stored in this unit.
# Pushing MULTI-CONTROL right in the confir-	This unit can control up to two auxiliary equip-
mation display returns you to the PIN code input	ments such as VCR or portable devices (sold
display, and you can change the PIN code.	separately). When connected, auxiliary equip-
	ments are automatically read in as AUX
	sources and assigned to AUX1 or AUX2. The
	relationship between AUX1 and AUX2
	sources is explained below.
	About AUX1 and AUX2
	You have two methods to connect auxiliary
	equipments to this unit.
	AUX1 source:
	When connecting auxiliary equipment using a
	stereo mini plug cable
	% Insert the stereo mini plug into the
	input jack on this unit.
	For more details, refer to the installation man-
	ual.
	The allocation of this auxiliary equipment is
	automatically set to AUX1.
	AUX2 source:
	When connecting auxiliary equipment using an
	IP-BUS-RCA Interconnector (sold separately)
	% Use an IP-BUS-RCA Interconnector such
	as the CD-RB20/CD-RB10 (sold separetely)
	to connect this unit to auxiliary equipment
	featuring RCA output.
	For more details, refer to the IP-BUS-RCA Inter-
	connector owner’s manual.
	The allocation of this auxiliary equipment is
	automatically set to AUX2.

Section

02

English

#You can only make this type of connection if the auxiliary equipment has RCA outputs.

En 33