Operating this unit
1 Compare the FM tuner volume level | Initial Settings | ||
with the level of the source you wish to ad- | Adjusting initial settings | ||
just. | |||
2 Use |
|
| |
3 Push |
|
| |
adjust the source volume. |
|
| |
Each time |
|
| |
down, source volume increases or decreases. |
|
| |
|
| ||
SLA +4 to SLA |
|
| |
1 | |||
volume is increased or decreased. |
|
| |
| Using the initial settings, you can customize | ||
Notes | various system settings to achieve optimal per- | ||
! The AM tuner volume level can also be ad- | formance from this unit. | ||
1 Function display | |||
justed with source level adjustments. | |||
Shows the function status. | |||
! The | |||
|
| ||
are set to the same source level adjustment | 1 Press SOURCE and hold until the unit | ||
volume automatically. | |||
turns off. | |||
! External unit 1 and external unit 2 are set to | |||
|
| ||
the same source level adjustment volume | 2 Press | ||
automatically. | Language select appears in the display. | ||
| 3 Turn | ||
| the initial settings. | ||
| Turn | ||
| functions in the following order: | ||
| Language select (language | ||
| |||
| Face auto open (face auto | ||
| (auxiliary input | ||
| Dimmer | ||
| |||
| |||
| |||
| Reverse mode (reverse | ||
| (ever | ||
| Pin code input (pin code input) | ||
| Use the following instructions to operate each | ||
| particular setting. | ||
| # You can also select the function by pressing | ||
| FUNCTION on the remote control. | ||
| # BT AUDIO and Pin code input can be se- | ||
| lected only when Bluetooth adapter (e.g., CD- | ||
| BTB100) is connected to this unit. | ||
| # To cancel initial settings, press BAND. |
Section
02
English
En 29