Tuner
En 13
Listening to the radio
These are the basic steps necessary to operate
the radio. More advanced tuner operation is
explained starting on page 14.
1STEREO(ST) indicator
Shows that the frequency selected is being
broadcast in stereo.
2BANDindicator
Shows which band the radio is tuned to, AM
or FM.
3PRESET NUMBER indicator
Shows what preset has been selected.
4FREQUENCYindicator
Shows to which frequency the tuner is
tuned.
1 Press SOURCEto select the tuner.
Press SOURCEuntil you see Tunerdisplayed.
2 Use VOLUME to adjust the sound level.
Rotate to increase or decrease the volume.
3 Press BAND/ESCto select a band.
Press BAND/ESCuntil the desired band is dis-
played, FM1, FM2, FM3for FM or AM.
4 To perform manual tuning, press 2or 3
with quick presses.
The frequencies move up or down step by step.
5 To perform seek tuning, press and hold 2
or 3for about one second and release.
The tuner will scan the frequencies until a
broadcast strong enough for good reception is
found.
•You can cancel seek tuning by pressing either

2or 3with a quick press.

•If you press and hold 2or 3you can skip
broadcasting stations. Seek tuning starts as
soon as you release the buttons.
Note
•When the frequency selected is being broad-
cast in stereo the STEREO (ST )indicator will
light.
123
4
English Español Deutsch Français Italiano Nederlands
03
Section