07
Section
Audio Adjustments
•If you switch the SFEQ mode, the H.P.F.func-
tion is automatically switched off. By switch-
ing the H.P.F.function on after selecting the
SFEQmode, you can combine H.P.F.function
with SFEQfunction.
Using balance adjustment
You can select a fader/balance setting that pro-
vides an ideal listening environment in all occu-
pied seats.
1 Press AUDIO to select Fad.
Press AUDIO until Fadappears in the display.
•If the balance setting has been previously
adjusted, Bal will be displayed.
2 Press 5or ∞to adjust front/rear speaker
balance.
Each press of 5or∞moves the front/rear
speaker balance towards the front or the rear.
•Fad F15– Fad R15 is displayed as the front/rear
speaker balance moves from front to rear.
•Fad 0is the proper setting when only two
speakers are used.
•When the rear output setting is Rear SP:S.W,
you cannot adjust front/rear speaker balance.
Refer to Setting the rear output and subwoofer
controlleron page 38.
3 Press 2or 3to adjust left/right speaker
balance.
When you press 2or 3, Bal 0is displayed. Each
press of 2or3moves the left/right speaker
balance towards the left or the right.
•Bal L9– Bal R9 is displayed as the left/right
speaker balance moves from left to right.
Using the equalizer
The graphic equalizer lets you adjust the equal-
ization to match car interior acoustic character-
istics as desired.

Recalling equalizer curves

There are seven stored equalizer curves which
you can easily recall at any time. Here is a list of
the equalizer curves:
Display Equalizer curve
SUPER BASS Super bass
POWERFUL Powerful
NATURAL Natural
VOCAL Vocal
CUSTOM1,2 Custom1,2
FLAT Flat
•CUSTOM1and CUSTOM2 are adjusted equal-
izer curve.
•A separate CUSTOM1 cur ve can be created
for each source. (The Built-in CD player and
Multi-CD player are set to the same Equalizer
Curve Adjustment setting automatically.)
•If you make adjustments when a cur ve other
than CUSTOM2is selected, the equalizer curve
settings are memorized in CUSTOM1.
•A CUSTOM2curve can be created common to
all sources.
•If you make adjustments when the CUSTOM2
curve is selected, the CUSTOM2curve is
updated.
•When FLAT is selected no supplement or
correction is made to the sound. This is useful
to check the effect of the equalizer curves by
switching alternatively between FLAT and a set
equalizer curve.
En
32