Other Functions
Setting the time display on or off
You can display the clock on each sound source
display.
Press CLOCKto select the time display.
Each press of CLOCKturns time display on or
off.
•The time display disappears temporarily when
you perform other operations, but the time indi-
cation is displayed again after 6 seconds.
Note
•Even when the sources and the feature demo
are off, the time appears on the display.
Pressing CLOCKswitches the time display
on/off.
Using different entertainmentdisplays
You can enjoy entertainment displays while
listening to each sound source.
Press ENTERTAINMENT.
Each time you press ENTERTAINMENTthe
display changes in the following order:
SOURCE ICONDISPLAY—BGV 1—BGV 2—BGV
3—BGV 4—LEVEL INDICATOR 1—LEVEL INDI-
CATOR 2—MOVIE SCREEN 1—MOVIE SCREEN
2—ENTERTAINMENT CLOCK
•BGV stands for Back Ground Visual.
Using the AUX source
An IP-BUS-RCA Interconnector such as the
CD-RB20 or CD-RB10 (sold separately) lets you
connect this unit to auxiliary equipment featur-
ing RCA output. For more details, refer to the
IP-BUS-RCA Interconnector owner‘s manual.

Selecting AUX as the source

Press SOURCEto select AUX as the source.
Press SOURCEuntil AUX appears in the display.
•If the auxiliar y setting is not switched on, AUX
cannot be selected. For more details, see
Switching the auxiliary settingon page 38.

Setting the AUX title

The title displayed for the AUX source can be
changed.
1 After you have selected AUXas the source,
press FUNCTION and hold until TITLEappears
in the display.
2 Press 1 numbered button to select the desired
character type.
Press 1numbered button repeatedly to switch
between the following character type:
Alphabet(Upper case), Numbers and Symbols—
Alphabet(Lower case)
•You can select to input Numbers and Symbols
by pressing 2numbered button.
En
40
09
Section