Pioneer DEH-P740MP Switching the Telephone Muting/Attenuation

Initial Settings
En 39
Notes
• Even if you change this setting, there is no
output unless you switch the non fading out-
put (refer to page 35) or subwoofer output
(refer to page 34) in the audio menu on.
•If you change the subwoofer controller, sub-
woofer output and non fading output in the
audio menu return to the factory settings.
•Both rear speaker leads output and RCA rear
output are switched simultaneously in this
setting mode.
1 Press FUNCTION to select SW.
Press FUNCTION repeatedly until Rear SP
appears in the display.
2 Change the rear output setting with 5/∞.
Pressing 5/∞will switch between Rear SP
:FULL(full-range speaker) and Rear SP :S.W
(subwoofer) and that status will be displayed.
Notes
• When no subwoofer is connected to the rear
output, select Rear SP:FULL.
• When a subwoofer is connected to the rear
output, set for subwoofer Rear SP:S.W.
• When the rear output setting is Rear SP:S.W,
you cannot change the subwoofer controller.
3 Change the subwoofer controller with
2/3.
Pressing 2/3will switch between S.W Control
:INTand S.W Control :EXT and that status will
be displayed.
Switching the Telephone
Muting/Attenuation
Sound from this system is muted or attenuated
automatically when a call is made or received
using a cellular telephone connected to this
product.
1 Press FUNCTION to select TEL.
Press FUNCTION repeatedly until Telephone
appears in the display.
2 Switch the telephone muting/attenuation
with 2/3.
Pressing 2/3will switch between Telephone
:ATT(attenuation) and Telephone :MUTE(mut-
ing) and that status will be displayed.
English Español Deutsch Français Italiano Nederlands
08
Section