Multi-CD Player
Playing tracks in a random order
Random play lets you play back tracks in a ran-
dom order within the repeat range, RANDOM
(multi-CD player repeat) and D.RANDOM (disc
repeat).
1 Select the repeat range.
Refer to Repeating play on page 25.
2 Press FUNCTION to select RDM.
Press FUNCTION until Random appears in the
display.
3 Press 5to turn random play on.
Random :ONappears in the display. Tracks will
play in a random order within the previously
selected RANDOM (multi-CD player repeat) or
D.RANDOM (disc repeat) ranges.
4 Press ∞to turn random play off.
Random :OFFappears in the display. Tracks will
continue to play in order.
Scanning CDs and tracks
While you are using T.SCAN (disc repeat), the
beginning of each track on the selected disc
plays for about 10 seconds. When you are using
D.SCAN (multi-CD player repeat), the beginning
of the first track of each disc is played for about
10 seconds.
1 Select the repeat range.
Refer to Repeating play on page 25.
2 Press FUNCTION to select SCAN.
Press FUNCTION until Scan appears in the dis-
play.
3 Press 5to turn scan play on.
Scan :ONappears in the display. The first 10
seconds of each track of the present disc (or the
first track of each disc) is played.
4 When you find the desired track (or disc)
press ∞to turn scan play off.
Scan :OFFappears in the display. The track (or
disc) will continue to play.
•If the display has automatically returned to
the playback display, select SCAN again by
pressing FUNCTION.
Note
•After track or disc scanning is finished, nor-
mal playback of the tracks will begin again.
Pausing CD playback
Pause lets you temporarily stop playback of the
CD.
1 Press FUNCTION to select PAUSE.
Press FUNCTION until Pause appears in the
display.
2 Press 5to turn pause on.
Pause :ONappears in the display. Play of the
current track pauses.
3 Press ∞to turn pause off.
Pause :OFF appears in the display. Play will
resume at the same point that you turned pause
on.
En
26
06
Section